GeothermalCosts¶
GeothermalCosts
-
PySAM.GeothermalCosts.
default
(config) → GeothermalCosts¶ Load defaults for the configuration
config
. Available configurations are:- None
Note
Some inputs do not have default values and may be assigned a value from the variable’s Required attribute. See variable attribute descriptions below.
-
PySAM.GeothermalCosts.
from_existing
(data, optional config) → GeothermalCosts¶ Share data with an existing PySAM class. If
optional config
is a valid configuration name, load the module’s defaults for that configuration.
-
PySAM.GeothermalCosts.
new
() → GeothermalCosts¶
-
PySAM.GeothermalCosts.
wrap
(ssc_data_t) → GeothermalCosts¶ Load data from a PySSC object.
Warning
Do not call PySSC.data_free on the ssc_data_t provided to
wrap()
GeothermalCosts is a wrapper for the SSC compute module cmod_geothermal_costs.cpp
Interdependent Variables¶
The variables listed below are interdependent with other variables. If you change the value of one of these variables, you may need to change values of other variables. The SAM user interface manages these interdependent variables, but in PySAM, it is up to you change the value of all interdependent variables so they are consistent. See Interdependent Variables for examples and details.
- None
Functions¶
-
class
PySAM.GeothermalCosts.
GeothermalCosts
¶ This class contains all the variable information for running a simulation. Variables are grouped together in the subclasses as properties. If property assignments are the wrong type, an error is thrown.
-
assign
(dict) → None¶ Assign attributes from nested dictionary, except for Outputs
nested_dict = { 'GeoHourly': { var: val, ...}, ...}
-
execute
(int verbosity) → None¶ Execute simulation with verbosity level 0 (default) or 1
-
export
() → dict¶ Export attributes into nested dictionary
-
replace
(dict) → None¶ Replace attributes from nested dictionary, except for Outputs. Unassigns all values in each Group then assigns from the input dict.
nested_dict = { 'GeoHourly': { var: val, ...}, ...}
-
unassign
(name) → None¶ Unassign a value in any of the variable groups.
-
value
(name, optional value) → Union[None, float, dict, sequence, str]¶ Get or set by name a value in any of the variable groups.
-
GeoHourly Group¶
-
class
PySAM.GeothermalCosts.GeothermalCosts.
GeoHourly
¶ -
assign
(dict) → None¶ Assign attributes from dictionary, overwriting but not removing values.
GeoHourly_vals = { var: val, ...}
-
export
() → dict¶ Export attributes into dictionary.
-
replace
(dict) → None¶ Replace attributes from dictionary, unassigning values not present in input
dict
.GeoHourly_vals = { var: val, ...}
-
GF_flowrate
¶ GF Flow Rate [lb/h]
Required: Required if conversion_type=1
Type: float
-
condensate_pump_power
¶ hp
Required: Required if conversion_type=1
Type: float
-
conversion_type
¶ Conversion Type
Constraints: INTEGER
Required: True
Type: float
-
cw_pump_head
¶ Cooling Water Pump Head [lb/h]
Required: Required if conversion_type=1
Type: float
-
cw_pump_work
¶ CW Pump Work [kW]
Required: Required if conversion_type=1
Type: float
-
cwflow
¶ Cooling Water Flow [lb/h]
Required: Required if conversion_type=1
Type: float
-
design_temp
¶ Power block design temperature [C]
Required: True
Type: float
-
dt_prod_well
¶ Temperature loss in production well [C]
Required: True
Type: float
-
eff_secondlaw
¶ Second Law Efficiency [%]
Required: True
Type: float
-
flash_count
¶ Flash Count [(1 -2)]
Required: Required if conversion_type=1
Type: float
-
gross_cost_output
¶ Gross output from GETEM for cost calculations [MW]
Required: True
Type: float
-
gross_output
¶ Gross output from GETEM [kW]
Required: True
Type: float
-
hp_flash_pressure
¶ HP Flash Pressure [psia]
Required: Required if conversion_type=1
Type: float
-
lp_flash_pressure
¶ LP Flash Pressure [psia]
Required: Required if conversion_type=1
Type: float
-
ncg_condensate_pump
¶ Condensate Pump Work [kW]
Required: Required if conversion_type=1
Type: float
-
ppi_base_year
¶ PPI Base Year
Required: False. Automatically set to 19 if not assigned explicitly or loaded from defaults.
Type: float
-
pressure_ratio_1
¶ Suction Steam Ratio 1
Required: Required if conversion_type=1
Type: float
-
pressure_ratio_2
¶ Suction Steam Ratio 2
Required: Required if conversion_type=1
Type: float
-
pressure_ratio_3
¶ Suction Steam Ratio 3
Required: Required if conversion_type=1
Type: float
-
qCondenser
¶ Condenser Heat Rejected [btu/h]
Required: Required if conversion_type=1
Type: float
-
qRejectByStage_1
¶ Heat Rejected by NCG Condenser Stage 1 [BTU/hr]
Required: Required if conversion_type=1
Type: float
-
qRejectByStage_2
¶ Heat Rejected by NCG Condenser Stage 2 [BTU/hr]
Required: Required if conversion_type=1
Type: float
-
qRejectByStage_3
¶ Heat Rejected by NCG Condenser Stage 3 [BTU/hr]
Required: Required if conversion_type=1
Type: float
-
qRejectTotal
¶ Total Rejected Heat [btu/h]
Required: Required if conversion_type=1
Type: float
-
spec_vol
¶ Specific Volume [cft/lb]
Required: Required if conversion_type=1
Type: float
-
spec_vol_lp
¶ LP Specific Volume [cft/lb]
Required: Required if conversion_type=1
Type: float
-
v_stage_1
¶ Vacumm Pump Stage 1 [kW]
Required: Required if conversion_type=1
Type: float
-
v_stage_2
¶ Vacumm Pump Stage 2 [kW]
Required: Required if conversion_type=1
Type: float
-
v_stage_3
¶ Vacumm Pump Stage 3 [kW]
Required: Required if conversion_type=1
Type: float
-
x_hp
¶ HP Mass Fraction [%]
Required: Required if conversion_type=1
Type: float
-
x_lp
¶ LP Mass Fraction [%]
Required: Required if conversion_type=1
Type: float
-
Outputs Group¶
-
class
PySAM.GeothermalCosts.GeothermalCosts.
Outputs
¶ -
assign
(dict) → None¶ Assign attributes from dictionary, overwriting but not removing values.
Outputs_vals = { var: val, ...}
-
export
() → dict¶ Export attributes into dictionary.
-
replace
(dict) → None¶ Replace attributes from dictionary, unassigning values not present in input
dict
.Outputs_vals = { var: val, ...}
-
baseline_cost
¶ Baseline Cost [$/kW]
Type: float
-