Pvsamv1¶

Detailed photovoltaic system model with separate components for module and inverter

PySAM.Pvsamv1.default(config) → Pvsamv1¶

Load defaults for the configuration config. Available configurations are:

“FlatPlatePVAllEquityPartnershipFlip”

“FlatPlatePVCommercial”

“FlatPlatePVHostDeveloper”

“FlatPlatePVLCOECalculator”

“FlatPlatePVLeveragedPartnershipFlip”

“FlatPlatePVMerchantPlant”

“FlatPlatePVNone”

“FlatPlatePVResidential”

“FlatPlatePVSaleLeaseback”

“FlatPlatePVSingleOwner”

“FlatPlatePVThirdParty”

“PVBatteryAllEquityPartnershipFlip”

“PVBatteryCommercial”

“PVBatteryHostDeveloper”

“PVBatteryLeveragedPartnershipFlip”

“PVBatteryMerchantPlant”

“PVBatteryResidential”

“PVBatterySaleLeaseback”

“PVBatterySingleOwner”

“PVBatteryThirdParty”

Note

Some inputs do not have default values and may be assigned a value from the variable’s Required attribute. See variable attribute descriptions below.

PySAM.Pvsamv1.from_existing(data, optional config) → Pvsamv1¶: Share data with an existing PySAM class. If optional config is a valid configuration name, load the module’s defaults for that configuration.

PySAM.Pvsamv1.new() → Pvsamv1¶

PySAM.Pvsamv1.wrap(ssc_data_t) → Pvsamv1¶: Load data from a PySSC object.

Warning

Do not call PySSC.data_free on the ssc_data_t provided to wrap()

Pvsamv1 is a wrapper for the SSC compute module cmod_pvsamv1.cpp

Interdependent Variables¶

The variables listed below are interdependent with other variables. If you change the value of one of these variables, you may need to change values of other variables. The SAM user interface manages these interdependent variables, but in PySAM, it is up to you change the value of all interdependent variables so they are consistent. See Interdependent Variables for examples and details.

6par_aisc

6par_bvoc

6par_imp

6par_isc

6par_vmp

6par_voc

cec_area

cec_i_mp_ref

cec_module_length

cec_module_width

cec_v_mp_ref

cec_v_oc_ref

inv_cec_cg_c0

inv_cec_cg_c1

inv_cec_cg_c2

inv_cec_cg_c3

inv_cec_cg_eff_cec

inv_cec_cg_paco

inv_cec_cg_pdco

inv_cec_cg_psco

inv_cec_cg_vdcmax

inv_cec_cg_vdco

inv_ds_paco

inv_ds_vdcmax

inv_num_mppt

inv_pd_eff

inv_pd_paco

inv_pd_pdco

inv_pd_vdcmax

inv_snl_c0

inv_snl_c1

inv_snl_c2

inv_snl_c3

inv_snl_eff_cec

inv_snl_paco

inv_snl_pdco

inv_snl_pso

inv_snl_vdcmax

inv_snl_vdco

inverter_count

inverter_model

module_model

mppt_hi_inverter

mppt_low_inverter

sd11par_Vmp0

sd11par_Voc0

snl_a

snl_a0

snl_a1

snl_a2

snl_a3

snl_a4

snl_aimp

snl_aisc

snl_area

snl_b

snl_b0

snl_b1

snl_b2

snl_b3

snl_b4

snl_b5

snl_bvmpo

snl_bvoco

snl_c0

snl_c1

snl_c2

snl_c3

snl_dtc

snl_fd

snl_impo

snl_isco

snl_mbvmp

snl_mbvoc

snl_module_structure

snl_n

snl_ref_a

snl_ref_b

snl_ref_dT

snl_series_cells

snl_vmpo

snl_voco

spe_area

spe_eff0

spe_eff1

spe_eff2

spe_eff3

spe_eff4

spe_rad0

spe_rad1

spe_rad2

spe_rad3

spe_rad4

spe_reference

spe_vmp

spe_voc

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray2_modules_per_string

subarray2_nstrings

subarray3_enable

subarray3_modules_per_string

subarray3_nstrings

subarray4_enable

subarray4_modules_per_string

subarray4_nstrings

system_capacity

Functions¶

class PySAM.Pvsamv1.Pvsamv1¶

This class contains all the variable information for running a simulation. Variables are grouped together in the subclasses as properties. If property assignments are the wrong type, an error is thrown.

Reopt_size_battery_post()¶

Given a PV system with Utilityrate5 parameters, get the optimal battery size. Wind and additional PV are disabled. Maps SAM compute module inputs to those of the ReOpt Lite API: Pvsamv1 model linked with Battery, Utilityrate5, with Cashloan optional.

For more information on which PySAM variables are used, see: https://github.com/NREL/ssc/blob/develop/ssc/cmod_pvsamv1_eqns.h

For an example, see the ‘Examples’ readthedocs page.

assign(dict) → None¶

Assign attributes from nested dictionary, except for Outputs

nested_dict = { 'Solar Resource': { var: val, ...}, ...}

execute(int verbosity) → None¶: Execute simulation with verbosity level 0 (default) or 1

export() → dict¶: Export attributes into nested dictionary

replace(dict) → None¶

Replace attributes from nested dictionary, except for Outputs. Unassigns all values in each Group then assigns from the input dict.

nested_dict = { 'Solar Resource': { var: val, ...}, ...}

unassign(name) → None¶: Unassign a value in any of the variable groups.

value(name, optional value) → Union[None, float, dict, sequence, str]¶: Get or set by name a value in any of the variable groups.

SolarResource Group¶

class PySAM.Pvsamv1.Pvsamv1.SolarResource¶

assign(dict) → None¶

Assign attributes from dictionary, overwriting but not removing values.

SolarResource_vals = { var: val, ...}

export() → dict¶: Export attributes into dictionary.

replace(dict) → None¶

Replace attributes from dictionary, unassigning values not present in input dict.

SolarResource_vals = { var: val, ...}

albedo¶

User specified monthly ground albedo (non-spatial) [0..1]

Constraints: LENGTH=12

Required: Required if use_spatial_albedos=0

Type:	sequence

albedo_spatial¶

User specified monthly ground albedo (spatial) [0..1]

Required: Required if use_spatial_albedos=1

Type:	sequence[sequence]

irrad_mode¶

Irradiance input translation mode

Options: 0=beam&diffuse,1=total&beam,2=total&diffuse,3=poa_reference,4=poa_pyranometer

Constraints: INTEGER,MIN=0,MAX=4

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:	float

sky_model¶

Diffuse sky model

Options: 0=isotropic,1=hkdr,2=perez

Constraints: INTEGER,MIN=0,MAX=2

Required: False. Automatically set to 2 if not assigned explicitly or loaded from defaults.

Type:	float

solar_resource_data¶

Weather data

Info: lat,lon,tz,elev,year,month,hour,minute,gh,dn,df,poa,tdry,twet,tdew,rhum,pres,snow,alb,aod,wspd,wdir

Required: False for configuration with default inputs. May be required if a variable dependent on its value changes. Example: For the Detailed PV - Single Owner configuration, only Subarray 1 is enabled in the configuration defaults, so Subarray 2 inputs would not be required; if Subarray 2 is enabled, then Subarray 2 inputs is required.

Type:	dict

solar_resource_file¶

Weather file in TMY2, TMY3, EPW, or SAM CSV

Required: False for configuration with default inputs. May be required if a variable dependent on its value changes. Example: For the Detailed PV - Single Owner configuration, only Subarray 1 is enabled in the configuration defaults, so Subarray 2 inputs would not be required; if Subarray 2 is enabled, then Subarray 2 inputs is required.

Type:	str

use_spatial_albedos¶

Use spatial albedo values [0/1]

Options: 0=no,1=yes

Constraints: BOOLEAN

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:	float

use_wf_albedo¶

Use albedo in weather file if provided [0/1]

Options: 0=user-specified,1=weatherfile

Constraints: BOOLEAN

Required: False. Automatically set to 1 if not assigned explicitly or loaded from defaults.

Type:	float

Losses Group¶

class PySAM.Pvsamv1.Pvsamv1.Losses¶

assign(dict) → None¶

Assign attributes from dictionary, overwriting but not removing values.

Losses_vals = { var: val, ...}

export() → dict¶: Export attributes into dictionary.

replace(dict) → None¶

Replace attributes from dictionary, unassigning values not present in input dict.

Losses_vals = { var: val, ...}

acwiring_loss¶

AC wiring loss [%]

Info: percent of inverter AC output

Constraints: MIN=0,MAX=100

Required: True

Type:	float

calculate_bifacial_electrical_mismatch¶

Calculate bifacial electrical mismatch

Constraints: BOOLEAN

Required: False. Automatically set to 1 if not assigned explicitly or loaded from defaults.

Type:	float

calculate_rack_shading¶

Calculate rack shading

Constraints: BOOLEAN

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:	float

dcoptimizer_loss¶

DC power optimizer loss [%]

Constraints: MIN=0,MAX=100

Required: True

Type:	float

en_snow_model¶

Toggle snow loss estimation [0/1]

Constraints: BOOLEAN

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:	float

subarray1_dcwiring_loss¶

Sub-array 1 DC wiring loss [%]

Constraints: MIN=0,MAX=100

Required: True

Type:	float

subarray1_diodeconn_loss¶

Sub-array 1 DC diodes and connections loss [%]

Constraints: MIN=0,MAX=100

Required: True

Type:	float

subarray1_electrical_mismatch¶

Sub-array 1 bifacial electrical mismatch loss [%]

Constraints: MIN=0,MAX=100

Required: True

Type:	float

subarray1_mismatch_loss¶

Sub-array 1 DC mismatch loss [%]

Constraints: MIN=0,MAX=100

Required: True

Type:	float

subarray1_nameplate_loss¶

Sub-array 1 DC nameplate loss [%]

Constraints: MIN=-5,MAX=100

Required: True

Type:	float

subarray1_rack_shading¶

Sub-array 1 rack shading loss [%]

Constraints: MIN=0,MAX=100

Required: True

Type:	float

subarray1_rear_soiling_loss¶

Sub-array 1 rear soiling loss [%]

Constraints: MIN=0,MAX=100

Required: True

Type:	float

subarray1_soiling¶

Sub-array 1 Monthly soiling loss [%]

Constraints: LENGTH=12

Required: True

Type:	sequence

subarray1_tracking_loss¶

Sub-array 1 DC tracking error loss [%]

Constraints: MIN=0,MAX=100

Required: True

Type:	float

subarray2_dcwiring_loss¶

Sub-array 2 DC wiring loss [%]

Constraints: MIN=0,MAX=100

Required: Required if subarray2_enable=1

Type:	float

subarray2_diodeconn_loss¶

Sub-array 2 DC diodes and connections loss [%]

Constraints: MIN=0,MAX=100

Required: Required if subarray2_enable=1

Type:	float

subarray2_electrical_mismatch¶

Sub-array 2 bifacial electrical mismatch loss [%]

Constraints: MIN=0,MAX=100

Required: Required if subarray2_enable=1

Type:	float

subarray2_mismatch_loss¶

Sub-array 2 DC mismatch loss [%]

Constraints: MIN=0,MAX=100

Required: Required if subarray2_enable=1

Type:	float

subarray2_nameplate_loss¶

Sub-array 2 DC nameplate loss [%]

Constraints: MIN=-5,MAX=100

Required: Required if subarray2_enable=1

Type:	float

subarray2_rack_shading¶

Sub-array 2 rack shading loss [%]

Constraints: MIN=0,MAX=100

Required: Required if subarray2_enable=1

Type:	float

subarray2_rear_soiling_loss¶

Sub-array 2 rear soiling loss [%]

Constraints: MIN=0,MAX=100

Required: Required if subarray2_enable=1

Type:	float

subarray2_soiling¶

Sub-array 2 Monthly soiling loss [%]

Constraints: LENGTH=12

Required: Required if subarray2_enable=1

Type:	sequence

subarray2_tracking_loss¶

Sub-array 2 DC tracking error loss [%]

Constraints: MIN=0,MAX=100

Required: Required if subarray2_enable=1

Type:	float

subarray3_dcwiring_loss¶

Sub-array 3 DC wiring loss [%]

Constraints: MIN=0,MAX=100

Required: Required if subarray3_enable=1

Type:	float

subarray3_diodeconn_loss¶

Sub-array 3 DC diodes and connections loss [%]

Constraints: MIN=0,MAX=100

Required: Required if subarray3_enable=1

Type:	float

subarray3_electrical_mismatch¶

Sub-array 3 bifacial electrical mismatch loss [%]

Constraints: MIN=0,MAX=100

Required: Required if subarray3_enable=1

Type:	float

subarray3_mismatch_loss¶

Sub-array 3 DC mismatch loss [%]

Constraints: MIN=0,MAX=100

Required: Required if subarray3_enable=1

Type:	float

subarray3_nameplate_loss¶

Sub-array 3 DC nameplate loss [%]

Constraints: MIN=-5,MAX=100

Required: Required if subarray3_enable=1

Type:	float

subarray3_rack_shading¶

Sub-array 3 rack shading loss [%]

Constraints: MIN=0,MAX=100

Required: Required if subarray3_enable=1

Type:	float

subarray3_rear_soiling_loss¶

Sub-array 3 rear soiling loss [%]

Constraints: MIN=0,MAX=100

Required: Required if subarray3_enable=1

Type:	float

subarray3_soiling¶

Sub-array 3 Monthly soiling loss [%]

Constraints: LENGTH=12

Required: Required if subarray3_enable=1

Type:	sequence

subarray3_tracking_loss¶

Sub-array 3 DC tracking error loss [%]

Constraints: MIN=0,MAX=100

Required: Required if subarray3_enable=1

Type:	float

subarray4_dcwiring_loss¶

Sub-array 4 DC wiring loss [%]

Constraints: MIN=0,MAX=100

Required: Required if subarray4_enable=1

Type:	float

subarray4_diodeconn_loss¶

Sub-array 4 DC diodes and connections loss [%]

Info: ?

Constraints: MIN=0,MAX=100

Required: Required if subarray4_enable=1

Type:	float

subarray4_electrical_mismatch¶

Sub-array 4 bifacial electrical mismatch loss [%]

Constraints: MIN=0,MAX=100

Required: Required if subarray4_enable=1

Type:	float

subarray4_mismatch_loss¶

Sub-array 4 DC mismatch loss [%]

Constraints: MIN=0,MAX=100

Required: Required if subarray4_enable=1

Type:	float

subarray4_nameplate_loss¶

Sub-array 4 DC nameplate loss [%]

Constraints: MIN=-5,MAX=100

Required: Required if subarray4_enable=1

Type:	float

subarray4_rack_shading¶

Sub-array 4 rack shading loss [%]

Constraints: MIN=0,MAX=100

Required: Required if subarray4_enable=1

Type:	float

subarray4_rear_soiling_loss¶

Sub-array 4 rear soiling loss [%]

Constraints: MIN=0,MAX=100

Required: Required if subarray4_enable=1

Type:	float

subarray4_soiling¶

Sub-array 4 Monthly soiling loss [%]

Constraints: LENGTH=12

Required: Required if subarray4_enable=1

Type:	sequence

subarray4_tracking_loss¶

Sub-array 4 DC tracking error loss [%]

Constraints: MIN=0,MAX=100

Required: Required if subarray4_enable=1

Type:	float

transformer_load_loss¶

Power transformer load loss [%]

Info: percent of AC output

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:	float

transformer_no_load_loss¶

Power transformer no load loss [%]

Info: percent of inverter AC capacity

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:	float

transmission_loss¶

Transmission loss [%]

Info: percent of AC output after transformer losses

Constraints: MIN=0,MAX=100

Required: True

Type:	float

Lifetime Group¶

class PySAM.Pvsamv1.Pvsamv1.Lifetime¶

assign(dict) → None¶

Assign attributes from dictionary, overwriting but not removing values.

Lifetime_vals = { var: val, ...}

export() → dict¶: Export attributes into dictionary.

replace(dict) → None¶

Replace attributes from dictionary, unassigning values not present in input dict.

Lifetime_vals = { var: val, ...}

ac_lifetime_losses¶

Lifetime daily AC losses [%]

Required: Required if en_ac_lifetime_losses=1

Type:	sequence

analysis_period¶

Lifetime analysis period [years]

Required: Required if system_use_lifetime_output=1

Type:	float

dc_degradation¶

Annual DC degradation [%/year]

Required: Required if system_use_lifetime_output=1

Type:	sequence

dc_lifetime_losses¶

Lifetime daily DC losses [%]

Required: Required if en_dc_lifetime_losses=1

Type:	sequence

en_ac_lifetime_losses¶

Enable lifetime daily AC losses [0/1]

Constraints: INTEGER,MIN=0,MAX=1

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:	float

en_dc_lifetime_losses¶

Enable lifetime daily DC losses [0/1]

Constraints: INTEGER,MIN=0,MAX=1

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:	float

inflation_rate¶

Inflation rate [%]

Constraints: MIN=-99

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:	float

save_full_lifetime_variables¶

Save and display vars for full lifetime [0/1]

Constraints: INTEGER,MIN=0,MAX=1

Required: False. Automatically set to 1 if not assigned explicitly or loaded from defaults.

Type:	float

system_use_lifetime_output¶

PV lifetime simulation [0/1]

Constraints: INTEGER,MIN=0,MAX=1

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:	float

SystemDesign Group¶

class PySAM.Pvsamv1.Pvsamv1.SystemDesign¶

assign(dict) → None¶

Assign attributes from dictionary, overwriting but not removing values.

SystemDesign_vals = { var: val, ...}

export() → dict¶: Export attributes into dictionary.

replace(dict) → None¶

Replace attributes from dictionary, unassigning values not present in input dict.

SystemDesign_vals = { var: val, ...}

enable_mismatch_vmax_calc¶

Enable mismatched subarray Vmax calculation

Constraints: BOOLEAN

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:	float

inverter_count¶

Number of inverters

Constraints: INTEGER,POSITIVE

Required: True

The value of inverter_count depends on the following variables:

6par_imp

6par_vmp

6par_voc

cec_i_mp_ref

cec_v_mp_ref

cec_v_oc_ref

inv_cec_cg_paco

inv_cec_cg_vdcmax

inv_ds_paco

inv_ds_vdcmax

inv_pd_paco

inv_pd_vdcmax

inv_snl_paco

inv_snl_vdcmax

inverter_model

module_model

sd11par_Vmp0

sd11par_Voc0

snl_a

snl_a0

snl_a1

snl_a2

snl_a3

snl_a4

snl_aimp

snl_aisc

snl_area

snl_b

snl_b0

snl_b1

snl_b2

snl_b3

snl_b4

snl_b5

snl_bvmpo

snl_bvoco

snl_c0

snl_c1

snl_c2

snl_c3

snl_dtc

snl_fd

snl_impo

snl_isco

snl_mbvmp

snl_mbvoc

snl_module_structure

snl_n

snl_series_cells

snl_vmpo

snl_voco

spe_area

spe_eff0

spe_eff1

spe_eff2

spe_eff3

spe_eff4

spe_rad0

spe_rad1

spe_rad2

spe_rad3

spe_rad4

spe_reference

spe_vmp

spe_voc

Type:	float

measured_temp_array¶

Measured module temperature [C]

Required: Required if use_measured_temp=1

Type:	sequence

subarray1_azimuth¶

Sub-array 1 Azimuth [degrees]

Options: 0=N,90=E,180=S,270=W

Constraints: MIN=0,MAX=359.9

Required: subarray1_track_mode~2&subarray1_track_mode~3

Type:	float

subarray1_backtrack¶

Sub-array 1 Backtracking enabled

Options: 0=no backtracking,1=backtrack

Constraints: BOOLEAN

Required: Required if subarray1_track_mode=1

Type:	float

subarray1_gcr¶

Sub-array 1 Ground coverage ratio [0..1]

Constraints: MIN=0.01,MAX=0.99

Required: False. Automatically set to 0.3 if not assigned explicitly or loaded from defaults.

Type:	float

subarray1_modules_per_string¶

Sub-array 1 Modules per string

Constraints: INTEGER,POSITIVE

Required: True

The value of the following variables depends on subarray1_modules_per_string:

system_capacity

The value of subarray1_modules_per_string depends on the following variables:

6par_imp

6par_vmp

6par_voc

cec_i_mp_ref

cec_v_mp_ref

cec_v_oc_ref

inv_cec_cg_paco

inv_cec_cg_vdcmax

inv_ds_paco

inv_ds_vdcmax

inv_pd_paco

inv_pd_vdcmax

inv_snl_paco

inv_snl_vdcmax

inverter_model

module_model

sd11par_Vmp0

sd11par_Voc0

snl_a

snl_a0

snl_a1

snl_a2

snl_a3

snl_a4

snl_aimp

snl_aisc

snl_area

snl_b

snl_b0

snl_b1

snl_b2

snl_b3

snl_b4

snl_b5

snl_bvmpo

snl_bvoco

snl_c0

snl_c1

snl_c2

snl_c3

snl_dtc

snl_fd

snl_impo

snl_isco

snl_mbvmp

snl_mbvoc

snl_module_structure

snl_n

snl_series_cells

snl_vmpo

snl_voco

spe_area

spe_eff0

spe_eff1

spe_eff2

spe_eff3

spe_eff4

spe_rad0

spe_rad1

spe_rad2

spe_rad3

spe_rad4

spe_reference

spe_vmp

spe_voc

Type:	float

subarray1_monthly_tilt¶

Sub-array 1 monthly tilt input [degrees]

Constraints: LENGTH=12

Required: Required if subarray1_track_mode=4

Type:	sequence

subarray1_mppt_input¶

Sub-array 1 Inverter MPPT input number

Constraints: INTEGER,POSITIVE

Required: False. Automatically set to 1 if not assigned explicitly or loaded from defaults.

Type:	float

subarray1_nstrings¶

Sub-array 1 Number of parallel strings

Constraints: INTEGER

The value of the following variables depends on subarray1_nstrings:

system_capacity

The value of subarray1_nstrings depends on the following variables:

6par_imp

6par_vmp

6par_voc

cec_i_mp_ref

cec_v_mp_ref

cec_v_oc_ref

inv_cec_cg_paco

inv_cec_cg_vdcmax

inv_ds_paco

inv_ds_vdcmax

inv_pd_paco

inv_pd_vdcmax

inv_snl_paco

inv_snl_vdcmax

inverter_model

module_model

sd11par_Vmp0

sd11par_Voc0

snl_a

snl_a0

snl_a1

snl_a2

snl_a3

snl_a4

snl_aimp

snl_aisc

snl_area

snl_b

snl_b0

snl_b1

snl_b2

snl_b3

snl_b4

snl_b5

snl_bvmpo

snl_bvoco

snl_c0

snl_c1

snl_c2

snl_c3

snl_dtc

snl_fd

snl_impo

snl_isco

snl_mbvmp

snl_mbvoc

snl_module_structure

snl_n

snl_series_cells

snl_vmpo

snl_voco

spe_area

spe_eff0

spe_eff1

spe_eff2

spe_eff3

spe_eff4

spe_rad0

spe_rad1

spe_rad2

spe_rad3

spe_rad4

spe_reference

spe_vmp

spe_voc

Type:	float

subarray1_rotlim¶

Sub-array 1 Tracker rotation limit [degrees]

Constraints: MIN=0,MAX=85

Required: False. Automatically set to 45 if not assigned explicitly or loaded from defaults.

Type:	float

subarray1_slope_azm¶

Sub-array 1 terrain azimuth [degrees]

Constraints: MIN=0,MAX=359.9

Required: Required if subarray1_track_mode=1

Type:	float

subarray1_slope_tilt¶

Sub-array 1 terrain tilt [degrees]

Constraints: MIN=0,MAX=90

Required: Required if subarray1_track_mode=1

Type:	float

subarray1_tilt¶

Sub-array 1 Tilt [degrees]

Options: 0=horizontal,90=vertical

Constraints: MIN=0,MAX=90

Required: subarray1_track_mode~2&subarray1_track_mode~4

Type:	float

subarray1_tilt_eq_lat¶

Sub-array 1 Tilt=latitude override [0/1]

Options: 0=false,1=override

Constraints: BOOLEAN

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:	float

subarray1_track_mode¶

Sub-array 1 Tracking mode

Options: 0=fixed,1=1axis,2=2axis,3=azi,4=monthly

Constraints: INTEGER,MIN=0,MAX=4

Required: True

Type:	float

subarray2_azimuth¶

Sub-array 2 Azimuth [degrees]

Options: 0=N,90=E,180=S,270=W

Constraints: MIN=0,MAX=359.9

Required: Required if subarray2_enable=1&subarray2_track_mode~2&subarray2_track_mode~3

Type:	float

subarray2_backtrack¶

Sub-array 2 Backtracking enabled

Options: 0=no backtracking,1=backtrack

Constraints: BOOLEAN

Type:	float

subarray2_enable¶

Sub-array 2 Enable [0/1]

Options: 0=disabled,1=enabled

Constraints: BOOLEAN

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

The value of the following variables depends on subarray2_enable:

system_capacity

The value of subarray2_enable depends on the following variables:

6par_imp

6par_vmp

6par_voc

cec_i_mp_ref

cec_v_mp_ref

cec_v_oc_ref

inv_cec_cg_paco

inv_cec_cg_vdcmax

inv_ds_paco

inv_ds_vdcmax

inv_pd_paco

inv_pd_vdcmax

inv_snl_paco

inv_snl_vdcmax

inverter_model

module_model

sd11par_Vmp0

sd11par_Voc0

snl_a

snl_a0

snl_a1

snl_a2

snl_a3

snl_a4

snl_aimp

snl_aisc

snl_area

snl_b

snl_b0

snl_b1

snl_b2

snl_b3

snl_b4

snl_b5

snl_bvmpo

snl_bvoco

snl_c0

snl_c1

snl_c2

snl_c3

snl_dtc

snl_fd

snl_impo

snl_isco

snl_mbvmp

snl_mbvoc

snl_module_structure

snl_n

snl_series_cells

snl_vmpo

snl_voco

spe_area

spe_eff0

spe_eff1

spe_eff2

spe_eff3

spe_eff4

spe_rad0

spe_rad1

spe_rad2

spe_rad3

spe_rad4

spe_reference

spe_vmp

spe_voc

Type:	float

subarray2_gcr¶

Sub-array 2 Ground coverage ratio [0..1]

Constraints: MIN=0.01,MAX=0.99

Required: False. Automatically set to 0.3 if not assigned explicitly or loaded from defaults.

Type:	float

subarray2_modules_per_string¶

Sub-array 2 Modules per string

Constraints: INTEGER,MIN=1

Required: Required if subarray2_enable=1

The value of the following variables depends on subarray2_modules_per_string:

system_capacity

Type:	float

subarray2_monthly_tilt¶

Sub-array 2 Monthly tilt input [degrees]

Constraints: LENGTH=12

Required: Required if subarray2_track_mode=4

Type:	sequence

subarray2_mppt_input¶

Sub-array 2 Inverter MPPT input number

Constraints: INTEGER,POSITIVE

Required: False. Automatically set to 1 if not assigned explicitly or loaded from defaults.

Type:	float

subarray2_nstrings¶

Sub-array 2 Number of parallel strings

Constraints: INTEGER,MIN=1

Required: Required if subarray2_enable=1

The value of the following variables depends on subarray2_nstrings:

system_capacity

Type:	float

subarray2_rotlim¶

Sub-array 2 Tracker rotation limit [degrees]

Constraints: MIN=0,MAX=85

Required: False. Automatically set to 45 if not assigned explicitly or loaded from defaults.

Type:	float

subarray2_slope_azm¶

Sub-array 2 terrain azimuth [degrees]

Constraints: MIN=0,MAX=359.9

Required: Required if subarray2_enable=1&subarray2_track_mode=1

Type:	float

subarray2_slope_tilt¶

Sub-array 2 terrain tilt [degrees]

Constraints: MIN=0,MAX=90

Required: Required if subarray2_enable=1&subarray2_track_mode=1

Type:	float

subarray2_tilt¶

Sub-array 2 Tilt [degrees]

Options: 0=horizontal,90=vertical

Constraints: MIN=0,MAX=90

Required: Required if subarray2_enable=1&subarray2_track_mode~2&subarray2_track_mode~4

Type:	float

subarray2_tilt_eq_lat¶

Sub-array 2 Tilt=latitude override [0/1]

Options: 0=false,1=override

Constraints: BOOLEAN

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:	float

subarray2_track_mode¶

Sub-array 2 Tracking mode

Options: 0=fixed,1=1axis,2=2axis,3=azi,4=monthly

Constraints: INTEGER,MIN=0,MAX=4

Required: Required if subarray2_enable=1

Type:	float

subarray3_azimuth¶

Sub-array 3 Azimuth [degrees]

Options: 0=N,90=E,180=S,270=W

Constraints: MIN=0,MAX=359.9

Required: Required if subarray3_enable=1&subarray3_track_mode~2&subarray3_track_mode~3

Type:	float

subarray3_backtrack¶

Sub-array 3 Backtracking enabled

Options: 0=no backtracking,1=backtrack

Constraints: BOOLEAN

Type:	float

subarray3_enable¶

Sub-array 3 Enable [0/1]

Options: 0=disabled,1=enabled

Constraints: BOOLEAN

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

The value of the following variables depends on subarray3_enable:

system_capacity

The value of subarray3_enable depends on the following variables:

6par_imp

6par_vmp

6par_voc

cec_i_mp_ref

cec_v_mp_ref

cec_v_oc_ref

inv_cec_cg_paco

inv_cec_cg_vdcmax

inv_ds_paco

inv_ds_vdcmax

inv_pd_paco

inv_pd_vdcmax

inv_snl_paco

inv_snl_vdcmax

inverter_model

module_model

sd11par_Vmp0

sd11par_Voc0

snl_a

snl_a0

snl_a1

snl_a2

snl_a3

snl_a4

snl_aimp

snl_aisc

snl_area

snl_b

snl_b0

snl_b1

snl_b2

snl_b3

snl_b4

snl_b5

snl_bvmpo

snl_bvoco

snl_c0

snl_c1

snl_c2

snl_c3

snl_dtc

snl_fd

snl_impo

snl_isco

snl_mbvmp

snl_mbvoc

snl_module_structure

snl_n

snl_series_cells

snl_vmpo

snl_voco

spe_area

spe_eff0

spe_eff1

spe_eff2

spe_eff3

spe_eff4

spe_rad0

spe_rad1

spe_rad2

spe_rad3

spe_rad4

spe_reference

spe_vmp

spe_voc

Type:	float

subarray3_gcr¶

Sub-array 3 Ground coverage ratio [0..1]

Constraints: MIN=0.01,MAX=0.99

Required: False. Automatically set to 0.3 if not assigned explicitly or loaded from defaults.

Type:	float

subarray3_modules_per_string¶

Sub-array 3 Modules per string

Constraints: INTEGER,MIN=1

Required: Required if subarray3_enable=1

The value of the following variables depends on subarray3_modules_per_string:

system_capacity

Type:	float

subarray3_monthly_tilt¶

Sub-array 3 Monthly tilt input [degrees]

Constraints: LENGTH=12

Type:	sequence

subarray3_mppt_input¶

Sub-array 3 Inverter MPPT input number

Constraints: INTEGER,POSITIVE

Required: False. Automatically set to 1 if not assigned explicitly or loaded from defaults.

Type:	float

subarray3_nstrings¶

Sub-array 3 Number of parallel strings

Constraints: INTEGER,MIN=1

Required: Required if subarray3_enable=1

The value of the following variables depends on subarray3_nstrings:

system_capacity

Type:	float

subarray3_rotlim¶

Sub-array 3 Tracker rotation limit [degrees]

Constraints: MIN=0,MAX=85

Required: False. Automatically set to 45 if not assigned explicitly or loaded from defaults.

Type:	float

subarray3_slope_azm¶

Sub-array 3 terrain azimuth [degrees]

Constraints: MIN=0,MAX=359.9

Required: Required if subarray3_enable=1&subarray3_track_mode=1

Type:	float

subarray3_slope_tilt¶

Sub-array 3 terrain tilt [degrees]

Constraints: MIN=0,MAX=90

Required: Required if subarray3_enable=1&subarray3_track_mode=1

Type:	float

subarray3_tilt¶

Sub-array 3 Tilt [degrees]

Options: 0=horizontal,90=vertical

Constraints: MIN=0,MAX=90

Required: Required if subarray3_enable=1&subarray3_track_mode~2&subarray3_track_mode~4

Type:	float

subarray3_tilt_eq_lat¶

Sub-array 3 Tilt=latitude override [0/1]

Options: 0=false,1=override

Constraints: BOOLEAN

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:	float

subarray3_track_mode¶

Sub-array 3 Tracking mode

Options: 0=fixed,1=1axis,2=2axis,3=azi,4=monthly

Constraints: INTEGER,MIN=0,MAX=4

Required: Required if subarray3_enable=1

Type:	float

subarray4_azimuth¶

Sub-array 4 Azimuth [degrees]

Options: 0=N,90=E,180=S,270=W

Constraints: MIN=0,MAX=359.9

Required: Required if subarray4_enable=1&subarray4_track_mode~2&subarray4_track_mode~3

Type:	float

subarray4_backtrack¶

Sub-array 4 Backtracking enabled

Options: 0=no backtracking,1=backtrack

Constraints: BOOLEAN

Type:	float

subarray4_enable¶

Sub-array 4 Enable [0/1]

Options: 0=disabled,1=enabled

Constraints: BOOLEAN

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

The value of the following variables depends on subarray4_enable:

system_capacity

The value of subarray4_enable depends on the following variables:

6par_imp

6par_vmp

6par_voc

cec_i_mp_ref

cec_v_mp_ref

cec_v_oc_ref

inv_cec_cg_paco

inv_cec_cg_vdcmax

inv_ds_paco

inv_ds_vdcmax

inv_pd_paco

inv_pd_vdcmax

inv_snl_paco

inv_snl_vdcmax

inverter_model

module_model

sd11par_Vmp0

sd11par_Voc0

snl_a

snl_a0

snl_a1

snl_a2

snl_a3

snl_a4

snl_aimp

snl_aisc

snl_area

snl_b

snl_b0

snl_b1

snl_b2

snl_b3

snl_b4

snl_b5

snl_bvmpo

snl_bvoco

snl_c0

snl_c1

snl_c2

snl_c3

snl_dtc

snl_fd

snl_impo

snl_isco

snl_mbvmp

snl_mbvoc

snl_module_structure

snl_n

snl_series_cells

snl_vmpo

snl_voco

spe_area

spe_eff0

spe_eff1

spe_eff2

spe_eff3

spe_eff4

spe_rad0

spe_rad1

spe_rad2

spe_rad3

spe_rad4

spe_reference

spe_vmp

spe_voc

Type:	float

subarray4_gcr¶

Sub-array 4 Ground coverage ratio [0..1]

Constraints: MIN=0.01,MAX=0.99

Required: False. Automatically set to 0.3 if not assigned explicitly or loaded from defaults.

Type:	float

subarray4_modules_per_string¶

Sub-array 4 Modules per string

Constraints: INTEGER,MIN=1

Required: Required if subarray4_enable=1

The value of the following variables depends on subarray4_modules_per_string:

system_capacity

Type:	float

subarray4_monthly_tilt¶

Sub-array 4 Monthly tilt input [degrees]

Constraints: LENGTH=12

Type:	sequence

subarray4_mppt_input¶

Sub-array 4 Inverter MPPT input number

Constraints: INTEGER,POSITIVE

Required: False. Automatically set to 1 if not assigned explicitly or loaded from defaults.

Type:	float

subarray4_nstrings¶

Sub-array 4 Number of parallel strings

Constraints: INTEGER,MIN=1

Required: Required if subarray4_enable=1

The value of the following variables depends on subarray4_nstrings:

system_capacity

Type:	float

subarray4_rotlim¶

Sub-array 4 Tracker rotation limit [degrees]

Constraints: MIN=0,MAX=85

Required: False. Automatically set to 45 if not assigned explicitly or loaded from defaults.

Type:	float

subarray4_slope_azm¶

Sub-array 4 terrain azimuth [degrees]

Constraints: MIN=0,MAX=359.9

Required: Required if subarray4_enable=1&subarray4_track_mode=1

Type:	float

subarray4_slope_tilt¶

Sub-array 4 terrain tilt [degrees]

Constraints: MIN=0,MAX=90

Required: Required if subarray4_enable=1&subarray4_track_mode=1

Type:	float

subarray4_tilt¶

Sub-array 4 Tilt [degrees]

Options: 0=horizontal,90=vertical

Constraints: MIN=0,MAX=90

Required: Required if subarray4_enable=1&subarray4_track_mode~2&subarray4_track_mode~4

Type:	float

subarray4_tilt_eq_lat¶

Sub-array 4 Tilt=latitude override [0/1]

Options: 0=false,1=override

Constraints: BOOLEAN

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:	float

subarray4_track_mode¶

Sub-array 4 Tracking mode

Options: 0=fixed,1=1axis,2=2axis,3=azi,4=monthly

Constraints: INTEGER,MIN=0,MAX=4

Required: Required if subarray4_enable=1

Type:	float

system_capacity¶

DC Nameplate capacity [kWdc]

Required: True

The value of system_capacity depends on the following variables:

6par_imp

6par_vmp

6par_voc

cec_i_mp_ref

cec_v_mp_ref

cec_v_oc_ref

inv_cec_cg_paco

inv_cec_cg_vdcmax

inv_ds_paco

inv_ds_vdcmax

inv_pd_paco

inv_pd_vdcmax

inv_snl_paco

inv_snl_vdcmax

inverter_model

module_model

sd11par_Vmp0

sd11par_Voc0

snl_a

snl_a0

snl_a1

snl_a2

snl_a3

snl_a4

snl_aimp

snl_aisc

snl_area

snl_b

snl_b0

snl_b1

snl_b2

snl_b3

snl_b4

snl_b5

snl_bvmpo

snl_bvoco

snl_c0

snl_c1

snl_c2

snl_c3

snl_dtc

snl_fd

snl_impo

snl_isco

snl_mbvmp

snl_mbvoc

snl_module_structure

snl_n

snl_series_cells

snl_vmpo

snl_voco

spe_area

spe_eff0

spe_eff1

spe_eff2

spe_eff3

spe_eff4

spe_rad0

spe_rad1

spe_rad2

spe_rad3

spe_rad4

spe_reference

spe_vmp

spe_voc

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray2_modules_per_string

subarray2_nstrings

subarray3_enable

subarray3_modules_per_string

subarray3_nstrings

subarray4_enable

subarray4_modules_per_string

subarray4_nstrings

Type:	float

use_measured_temp¶

Use measured temperatures [0/1]

Constraints: INTEGER,MIN=0,MAX=1

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:	float

Shading Group¶

class PySAM.Pvsamv1.Pvsamv1.Shading¶

assign(dict) → None¶

Assign attributes from dictionary, overwriting but not removing values.

Shading_vals = { var: val, ...}

export() → dict¶: Export attributes into dictionary.

replace(dict) → None¶

Replace attributes from dictionary, unassigning values not present in input dict.

Shading_vals = { var: val, ...}

subarray1_shade_mode¶

Sub-array 1 shading mode (fixed tilt or 1x tracking) [0/1/2]

Options: 0=none,1=standard(non-linear),2=thin film(linear)

Constraints: INTEGER,MIN=0,MAX=2

Required: True

Type:	float

subarray1_shading_azal¶

Sub-array 1 Azimuth x altitude beam shading losses [%]

Required: False for configuration with default inputs. May be required if a variable dependent on its value changes. Example: For the Detailed PV - Single Owner configuration, only Subarray 1 is enabled in the configuration defaults, so Subarray 2 inputs would not be required; if Subarray 2 is enabled, then Subarray 2 inputs is required.

Type:	sequence[sequence]

subarray1_shading_diff¶

Sub-array 1 Diffuse shading loss [%]

Required: False for configuration with default inputs. May be required if a variable dependent on its value changes. Example: For the Detailed PV - Single Owner configuration, only Subarray 1 is enabled in the configuration defaults, so Subarray 2 inputs would not be required; if Subarray 2 is enabled, then Subarray 2 inputs is required.

Type:	float

subarray1_shading_mxh¶

Sub-array 1 Month x Hour beam shading losses [%]

Required: False for configuration with default inputs. May be required if a variable dependent on its value changes. Example: For the Detailed PV - Single Owner configuration, only Subarray 1 is enabled in the configuration defaults, so Subarray 2 inputs would not be required; if Subarray 2 is enabled, then Subarray 2 inputs is required.

Type:	sequence[sequence]

subarray1_shading_string_option¶

Sub-array 1 shading string option

Options: 0=shadingdb,1=average,2=maximum,3=minimum

Constraints: INTEGER,MIN=-1,MAX=4

Required: False. Automatically set to -1 if not assigned explicitly or loaded from defaults.

Type:	float

subarray1_shading_timestep¶

Sub-array 1 timestep beam shading losses [%]

Required: False for configuration with default inputs. May be required if a variable dependent on its value changes. Example: For the Detailed PV - Single Owner configuration, only Subarray 1 is enabled in the configuration defaults, so Subarray 2 inputs would not be required; if Subarray 2 is enabled, then Subarray 2 inputs is required.

Type:	sequence[sequence]

subarray2_shade_mode¶

Sub-array 2 Shading mode (fixed tilt or 1x tracking) [0/1/2]

Options: 0=none,1=standard(non-linear),2=thin film(linear)

Constraints: INTEGER,MIN=0,MAX=2

Required: Required if subarray2_enable=1

Type:	float

subarray2_shading_azal¶

Sub-array 2 Azimuth x altitude beam shading losses [%]

Required: False for configuration with default inputs. May be required if a variable dependent on its value changes. Example: For the Detailed PV - Single Owner configuration, only Subarray 1 is enabled in the configuration defaults, so Subarray 2 inputs would not be required; if Subarray 2 is enabled, then Subarray 2 inputs is required.

Type:	sequence[sequence]

subarray2_shading_diff¶

Sub-array 2 Diffuse shading loss [%]

Required: False for configuration with default inputs. May be required if a variable dependent on its value changes. Example: For the Detailed PV - Single Owner configuration, only Subarray 1 is enabled in the configuration defaults, so Subarray 2 inputs would not be required; if Subarray 2 is enabled, then Subarray 2 inputs is required.

Type:	float

subarray2_shading_mxh¶

Sub-array 2 Month x Hour beam shading losses [%]

Required: False for configuration with default inputs. May be required if a variable dependent on its value changes. Example: For the Detailed PV - Single Owner configuration, only Subarray 1 is enabled in the configuration defaults, so Subarray 2 inputs would not be required; if Subarray 2 is enabled, then Subarray 2 inputs is required.

Type:	sequence[sequence]

subarray2_shading_string_option¶

Sub-array 2 Shading string option

Options: 0=shadingdb,1=average,2=maximum,3=minimum

Constraints: INTEGER,MIN=-1,MAX=4

Required: False. Automatically set to -1 if not assigned explicitly or loaded from defaults.

Type:	float

subarray2_shading_timestep¶

Sub-array 2 Timestep beam shading losses [%]

Required: False for configuration with default inputs. May be required if a variable dependent on its value changes. Example: For the Detailed PV - Single Owner configuration, only Subarray 1 is enabled in the configuration defaults, so Subarray 2 inputs would not be required; if Subarray 2 is enabled, then Subarray 2 inputs is required.

Type:	sequence[sequence]

subarray3_shade_mode¶

Sub-array 3 Shading mode (fixed tilt or 1x tracking) [0/1/2]

Options: 0=none,1=standard(non-linear),2=thin film(linear)

Constraints: INTEGER,MIN=0,MAX=2

Required: Required if subarray3_enable=1

Type:	float

subarray3_shading_azal¶

Sub-array 3 Azimuth x altitude beam shading losses [%]

Required: False for configuration with default inputs. May be required if a variable dependent on its value changes. Example: For the Detailed PV - Single Owner configuration, only Subarray 1 is enabled in the configuration defaults, so Subarray 2 inputs would not be required; if Subarray 2 is enabled, then Subarray 2 inputs is required.

Type:	sequence[sequence]

subarray3_shading_diff¶

Sub-array 3 Diffuse shading loss [%]

Required: False for configuration with default inputs. May be required if a variable dependent on its value changes. Example: For the Detailed PV - Single Owner configuration, only Subarray 1 is enabled in the configuration defaults, so Subarray 2 inputs would not be required; if Subarray 2 is enabled, then Subarray 2 inputs is required.

Type:	float

subarray3_shading_mxh¶

Sub-array 3 Month x Hour beam shading losses [%]

Required: False for configuration with default inputs. May be required if a variable dependent on its value changes. Example: For the Detailed PV - Single Owner configuration, only Subarray 1 is enabled in the configuration defaults, so Subarray 2 inputs would not be required; if Subarray 2 is enabled, then Subarray 2 inputs is required.

Type:	sequence[sequence]

subarray3_shading_string_option¶

Sub-array 3 Shading string option

Options: 0=shadingdb,1=average,2=maximum,3=minimum

Constraints: INTEGER,MIN=-1,MAX=4

Required: False. Automatically set to -1 if not assigned explicitly or loaded from defaults.

Type:	float

subarray3_shading_timestep¶

Sub-array 3 Timestep beam shading losses [%]

Required: False for configuration with default inputs. May be required if a variable dependent on its value changes. Example: For the Detailed PV - Single Owner configuration, only Subarray 1 is enabled in the configuration defaults, so Subarray 2 inputs would not be required; if Subarray 2 is enabled, then Subarray 2 inputs is required.

Type:	sequence[sequence]

subarray4_shade_mode¶

Sub-array 4 shading mode (fixed tilt or 1x tracking) [0/1/2]

Options: 0=none,1=standard(non-linear),2=thin film(linear)

Constraints: INTEGER,MIN=0,MAX=2

Required: Required if subarray4_enable=1

Type:	float

subarray4_shading_azal¶

Sub-array 4 Azimuth x altitude beam shading losses [%]

Required: False for configuration with default inputs. May be required if a variable dependent on its value changes. Example: For the Detailed PV - Single Owner configuration, only Subarray 1 is enabled in the configuration defaults, so Subarray 2 inputs would not be required; if Subarray 2 is enabled, then Subarray 2 inputs is required.

Type:	sequence[sequence]

subarray4_shading_diff¶

Sub-array 4 Diffuse shading loss [%]

Required: False for configuration with default inputs. May be required if a variable dependent on its value changes. Example: For the Detailed PV - Single Owner configuration, only Subarray 1 is enabled in the configuration defaults, so Subarray 2 inputs would not be required; if Subarray 2 is enabled, then Subarray 2 inputs is required.

Type:	float

subarray4_shading_mxh¶

Sub-array 4 Month x Hour beam shading losses [%]

Required: False for configuration with default inputs. May be required if a variable dependent on its value changes. Example: For the Detailed PV - Single Owner configuration, only Subarray 1 is enabled in the configuration defaults, so Subarray 2 inputs would not be required; if Subarray 2 is enabled, then Subarray 2 inputs is required.

Type:	sequence[sequence]

subarray4_shading_string_option¶

Sub-array 4 Shading string option

Options: 0=shadingdb,1=average,2=maximum,3=minimum

Constraints: INTEGER,MIN=-1,MAX=4

Required: False. Automatically set to -1 if not assigned explicitly or loaded from defaults.

Type:	float

subarray4_shading_timestep¶

Sub-array 4 Timestep beam shading losses [%]

Required: False for configuration with default inputs. May be required if a variable dependent on its value changes. Example: For the Detailed PV - Single Owner configuration, only Subarray 1 is enabled in the configuration defaults, so Subarray 2 inputs would not be required; if Subarray 2 is enabled, then Subarray 2 inputs is required.

Type:	sequence[sequence]

Layout Group¶

class PySAM.Pvsamv1.Pvsamv1.Layout¶

assign(dict) → None¶

Assign attributes from dictionary, overwriting but not removing values.

Layout_vals = { var: val, ...}

export() → dict¶: Export attributes into dictionary.

replace(dict) → None¶

Replace attributes from dictionary, unassigning values not present in input dict.

Layout_vals = { var: val, ...}

module_aspect_ratio¶

Module aspect ratio

Constraints: POSITIVE

Required: False. Automatically set to 1.7 if not assigned explicitly or loaded from defaults.

Type:	float

subarray1_mod_orient¶

Sub-array 1 Module orientation [0/1]

Options: 0=portrait,1=landscape

Constraints: INTEGER,MIN=0,MAX=1

Required: True

Type:	float

subarray1_nmodx¶

Sub-array 1 Number of modules along bottom of row

Constraints: INTEGER,POSITIVE

Required: True

Type:	float

subarray1_nmody¶

Sub-array 1 Number of modules along side of row

Constraints: INTEGER,POSITIVE

Required: True

Type:	float

subarray2_mod_orient¶

Sub-array 2 Module orientation [0/1]

Options: 0=portrait,1=landscape

Constraints: INTEGER,MIN=0,MAX=1

Required: Required if subarray2_enable=1

Type:	float

subarray2_nmodx¶

Sub-array 2 Number of modules along bottom of row

Constraints: INTEGER,POSITIVE

Required: Required if subarray2_enable=1

Type:	float

subarray2_nmody¶

Sub-array 2 Number of modules along side of row

Constraints: INTEGER,POSITIVE

Required: Required if subarray2_enable=1

Type:	float

subarray3_mod_orient¶

Sub-array 3 Module orientation [0/1]

Options: 0=portrait,1=landscape

Constraints: INTEGER,MIN=0,MAX=1

Required: Required if subarray3_enable=1

Type:	float

subarray3_nmodx¶

Sub-array 3 Number of modules along bottom of row

Constraints: INTEGER,POSITIVE

Required: Required if subarray3_enable=1

Type:	float

subarray3_nmody¶

Sub-array 3 Number of modules along side of row

Constraints: INTEGER,POSITIVE

Required: Required if subarray3_enable=1

Type:	float

subarray4_mod_orient¶

Sub-array 4 Module orientation [0/1]

Options: 0=portrait,1=landscape

Constraints: INTEGER,MIN=0,MAX=1

Required: Required if subarray4_enable=1

Type:	float

subarray4_nmodx¶

Sub-array 4 Number of modules along bottom of row

Constraints: INTEGER,POSITIVE

Required: Required if subarray4_enable=1

Type:	float

subarray4_nmody¶

Sub-array 4 Number of modules along side of row

Constraints: INTEGER,POSITIVE

Required: Required if subarray4_enable=1

Type:	float

Module Group¶

class PySAM.Pvsamv1.Pvsamv1.Module¶

assign(dict) → None¶

Assign attributes from dictionary, overwriting but not removing values.

Module_vals = { var: val, ...}

export() → dict¶: Export attributes into dictionary.

replace(dict) → None¶

Replace attributes from dictionary, unassigning values not present in input dict.

Module_vals = { var: val, ...}

module_model¶

Photovoltaic module model specifier

Options: 0=spe,1=cec,2=6par_user,3=snl,4=sd11-iec61853,5=PVYield

Constraints: INTEGER,MIN=0,MAX=5

Required: True

The value of the following variables depends on module_model:

inverter_count

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

SimpleEfficiencyModuleModel Group¶

class PySAM.Pvsamv1.Pvsamv1.SimpleEfficiencyModuleModel¶

assign(dict) → None¶

Assign attributes from dictionary, overwriting but not removing values.

SimpleEfficiencyModuleModel_vals = { var: val, ...}

export() → dict¶: Export attributes into dictionary.

replace(dict) → None¶

Replace attributes from dictionary, unassigning values not present in input dict.

SimpleEfficiencyModuleModel_vals = { var: val, ...}

spe_a¶

Cell temp parameter a

Required: Required if module_model=0

Type:	float

spe_area¶

Module area [m2]

Required: Required if module_model=0

The value of the following variables depends on spe_area:

inverter_count

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

spe_b¶

Cell temp parameter b

Required: Required if module_model=0

Type:	float

spe_bifacial_ground_clearance_height¶

Module ground clearance height [m]

Required: Required if module_model=0

Type:	float

spe_bifacial_transmission_factor¶

Bifacial transmission factor [0-1]

Required: Required if module_model=0

Type:	float

spe_bifaciality¶

Bifaciality factor [%]

Required: Required if module_model=0

Type:	float

spe_dT¶

Cell temp parameter dT

Required: Required if module_model=0

Type:	float

spe_eff0¶

Efficiency at irradiance level 0 [%]

Required: Required if module_model=0

The value of the following variables depends on spe_eff0:

inverter_count

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

spe_eff1¶

Efficiency at irradiance level 1 [%]

Required: Required if module_model=0

The value of the following variables depends on spe_eff1:

inverter_count

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

spe_eff2¶

Efficiency at irradiance level 2 [%]

Required: Required if module_model=0

The value of the following variables depends on spe_eff2:

inverter_count

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

spe_eff3¶

Efficiency at irradiance level 3 [%]

Required: Required if module_model=0

The value of the following variables depends on spe_eff3:

inverter_count

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

spe_eff4¶

Efficiency at irradiance level 4 [%]

Required: Required if module_model=0

The value of the following variables depends on spe_eff4:

inverter_count

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

spe_fd¶

Diffuse fraction [0..1]

Constraints: MIN=0,MAX=1

Required: Required if module_model=0

Type:	float

spe_is_bifacial¶

Modules are bifacial [0/1]

Options: 0=monofacial,1=bifacial

Required: Required if module_model=0

Type:	float

spe_module_structure¶

Mounting and module structure

Options: 0=glass/cell/polymer sheet - open rack,1=glass/cell/glass - open rack,2=polymer/thin film/steel - open rack,3=Insulated back, building-integrated PV,4=close roof mount,5=user-defined

Constraints: INTEGER,MIN=0,MAX=5

Required: Required if module_model=0

Type:	float

spe_rad0¶

Irradiance level 0 [W/m2]

Required: Required if module_model=0

The value of the following variables depends on spe_rad0:

inverter_count

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

spe_rad1¶

Irradiance level 1 [W/m2]

Required: Required if module_model=0

The value of the following variables depends on spe_rad1:

inverter_count

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

spe_rad2¶

Irradiance level 2 [W/m2]

Required: Required if module_model=0

The value of the following variables depends on spe_rad2:

inverter_count

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

spe_rad3¶

Irradiance level 3 [W/m2]

Required: Required if module_model=0

The value of the following variables depends on spe_rad3:

inverter_count

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

spe_rad4¶

Irradiance level 4 [W/m2]

Required: Required if module_model=0

The value of the following variables depends on spe_rad4:

inverter_count

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

spe_reference¶

Reference irradiance level

Constraints: INTEGER,MIN=0,MAX=4

Required: Required if module_model=0

The value of the following variables depends on spe_reference:

inverter_count

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

spe_temp_coeff¶

Temperature coefficient [%/C]

Required: Required if module_model=0

Type:	float

spe_vmp¶

Nominal max power voltage [V]

Constraints: POSITIVE

Required: Required if module_model=0

The value of the following variables depends on spe_vmp:

inverter_count

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

spe_voc¶

Nominal open circuit voltage [V]

Constraints: POSITIVE

Required: Required if module_model=0

The value of the following variables depends on spe_voc:

inverter_count

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

CECPerformanceModelWithModuleDatabase Group¶

class PySAM.Pvsamv1.Pvsamv1.CECPerformanceModelWithModuleDatabase¶

assign(dict) → None¶

Assign attributes from dictionary, overwriting but not removing values.

CECPerformanceModelWithModuleDatabase_vals = { var: val, ...}

export() → dict¶: Export attributes into dictionary.

replace(dict) → None¶

Replace attributes from dictionary, unassigning values not present in input dict.

CECPerformanceModelWithModuleDatabase_vals = { var: val, ...}

cec_a_ref¶

Nonideality factor a

Required: Required if module_model=1

Type:	float

cec_adjust¶

Temperature coefficient adjustment [%]

Required: Required if module_model=1

Type:	float

cec_alpha_sc¶

Short circuit current temperature coefficient [A/C]

Required: Required if module_model=1

Type:	float

cec_area¶

Module area [m2]

Required: Required if module_model=1

The value of the following variables depends on cec_area:

cec_module_length

Type:	float

cec_array_cols¶

Columns of modules in array

Required: Required if module_model=1&cec_temp_corr_mode=1

Type:	float

cec_array_rows¶

Rows of modules in array

Required: Required if module_model=1&cec_temp_corr_mode=1

Type:	float

cec_backside_temp¶

Module backside temperature [C]

Constraints: POSITIVE

Required: Required if module_model=1&cec_temp_corr_mode=1

Type:	float

cec_beta_oc¶

Open circuit voltage temperature coefficient [V/C]

Required: Required if module_model=1

Type:	float

cec_bifacial_ground_clearance_height¶

Module ground clearance height [m]

Required: Required if module_model=1

Type:	float

cec_bifacial_transmission_factor¶

Bifacial transmission factor [0-1]

Constraints: MIN=0,MAX=1

Required: Required if module_model=1

Type:	float

cec_bifaciality¶

Bifaciality factor [%]

Required: Required if module_model=1

Type:	float

cec_gamma_r¶

Maximum power point temperature coefficient [%/C]

Required: Required if module_model=1

Type:	float

cec_gap_spacing¶

Gap spacing [m]

Required: Required if module_model=1&cec_temp_corr_mode=1

Type:	float

cec_ground_clearance_height¶

Module ground clearance height for heat transfer coefficient [m]

Required: Required if cec_lacunarity_enable=1&cec_temp_corr_mode=1

Type:	float

cec_heat_transfer¶

Heat transfer dimensions

Options: 0=module,1=array

Constraints: INTEGER,MIN=0,MAX=1

Required: Required if module_model=1&cec_temp_corr_mode=1

Type:	float

cec_height¶

Array mounting height

Options: 0=one story,1=two story

Constraints: INTEGER,MIN=0,MAX=1

Required: Required if module_model=1

Type:	float

cec_i_l_ref¶

Light current [A]

Required: Required if module_model=1

Type:	float

cec_i_mp_ref¶

Maximum power point current [A]

Required: Required if module_model=1

The value of the following variables depends on cec_i_mp_ref:

inverter_count

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

cec_i_o_ref¶

Saturation current [A]

Required: Required if module_model=1

Type:	float

cec_i_sc_ref¶

Short circuit current [A]

Required: Required if module_model=1

Type:	float

cec_is_bifacial¶

Modules are bifacial [0/1]

Options: 0=monofacial,1=bifacial

Constraints: INTEGER,MIN=0,MAX=1

Required: Required if module_model=1

Type:	float

cec_lacunarity_enable¶

Enable lacunarity heat transfer model [0/1]

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:	float

cec_lacunarity_length¶

Module lacurnarity length for spatial heterogeneity [C]

Required: Required if cec_lacunarity_enable=1&cec_temp_corr_mode=1

Type:	float

cec_module_length¶

Module height [m]

Required: Required if module_model=1&cec_temp_corr_mode=1

The value of cec_module_length depends on the following variables:

cec_area

cec_module_width

Type:	float

cec_module_width¶

Module width [m]

Required: Required if module_model=1&cec_temp_corr_mode=1

The value of the following variables depends on cec_module_width:

cec_module_length

Type:	float

cec_mounting_config¶

Mounting configuration

Options: 0=rack,1=flush,2=integrated,3=gap

Constraints: INTEGER,MIN=0,MAX=3

Required: Required if module_model=1&cec_temp_corr_mode=1

Type:	float

cec_mounting_orientation¶

Mounting structure orientation

Options: 0=do not impede flow,1=vertical supports,2=horizontal supports

Constraints: INTEGER,MIN=0,MAX=2

Required: Required if module_model=1&cec_temp_corr_mode=1

Type:	float

cec_n_s¶

Number of cells in series

Constraints: POSITIVE

Required: Required if module_model=1

Type:	float

cec_r_s¶

Series resistance [ohm]

Required: Required if module_model=1

Type:	float

cec_r_sh_ref¶

Shunt resistance [ohm]

Required: Required if module_model=1

Type:	float

cec_standoff¶

Standoff mode

Options: 0=bipv,1=>3.5in,2=2.5-3.5in,3=1.5-2.5in,4=0.5-1.5in,5=<0.5in,6=ground/rack

Constraints: INTEGER,MIN=0,MAX=6

Required: Required if module_model=1

Type:	float

cec_t_noct¶

Nominal operating cell temperature [C]

Required: Required if module_model=1

Type:	float

cec_temp_corr_mode¶

Cell temperature model selection

Options: 0=noct,1=mc

Constraints: INTEGER,MIN=0,MAX=1

Required: Required if module_model=1

Type:	float

cec_transient_thermal_model_unit_mass¶

Module unit mass [kg/m^2]

Constraints: POSITIVE

Required: Required if module_model=1

Type:	float

cec_v_mp_ref¶

Maximum power point voltage [V]

Required: Required if module_model=1

The value of the following variables depends on cec_v_mp_ref:

inverter_count

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

cec_v_oc_ref¶

Open circuit voltage [V]

Required: Required if module_model=1

The value of the following variables depends on cec_v_oc_ref:

inverter_count

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

CECPerformanceModelWithUserEnteredSpecifications Group¶

class PySAM.Pvsamv1.Pvsamv1.CECPerformanceModelWithUserEnteredSpecifications¶

assign(dict) → None¶

Assign attributes from dictionary, overwriting but not removing values.

CECPerformanceModelWithUserEnteredSpecifications_vals = { var: val, ...}

export() → dict¶: Export attributes into dictionary.

replace(dict) → None¶

Replace attributes from dictionary, unassigning values not present in input dict.

CECPerformanceModelWithUserEnteredSpecifications_vals = { var: val, ...}

sixpar_aisc¶

Short circuit current temperature coefficient [A/C]

Required: Required if module_model=2

The value of sixpar_aisc depends on the following variables:

6par_isc

Type:	float

sixpar_area¶

Module area [m2]

Required: Required if module_model=2

Type:	float

sixpar_bifacial_ground_clearance_height¶

Module ground clearance height [m]

Required: Required if module_model=2

Type:	float

sixpar_bifacial_transmission_factor¶

Bifacial transmission factor [0-1]

Required: Required if module_model=2

Type:	float

sixpar_bifaciality¶

Bifaciality factor [%]

Required: Required if module_model=2

Type:	float

sixpar_bvoc¶

Open circuit voltage temperature coefficient [V/C]

Required: Required if module_model=2

The value of sixpar_bvoc depends on the following variables:

6par_voc

Type:	float

sixpar_celltech¶

Solar cell technology type

Options: monoSi=0,multiSi=1,CdTe=2,CIS=3,CIGS=4,Amorphous=5

Constraints: INTEGER,MIN=0,MAX=5

Required: Required if module_model=2

Type:	float

sixpar_gpmp¶

Maximum power point temperature coefficient [%/C]

Required: Required if module_model=2

Type:	float

sixpar_imp¶

Imp [A]

Required: Required if module_model=2

The value of the following variables depends on sixpar_imp:

inverter_count

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

sixpar_is_bifacial¶

Modules are bifacial [0/1]

Options: 0=monofacial,1=bifacial

Constraints: INTEGER,MIN=0,MAX=1

Required: Required if module_model=2

Type:	float

sixpar_isc¶

Isc [A]

Required: Required if module_model=2

The value of the following variables depends on sixpar_isc:

6par_aisc

Type:	float

sixpar_mounting¶

Array mounting height

Options: 0=one story,1=two story

Constraints: INTEGER,MIN=0,MAX=1

Required: Required if module_model=2

Type:	float

sixpar_nser¶

Nseries

Constraints: INTEGER,POSITIVE

Required: Required if module_model=2

Type:	float

sixpar_standoff¶

Standoff mode

Options: 0=bipv,1=>3.5in,2=2.5-3.5in,3=1.5-2.5in,4=0.5-1.5in,5=<0.5in,6=ground/rack

Constraints: INTEGER,MIN=0,MAX=6

Required: Required if module_model=2

Type:	float

sixpar_tnoct¶

Nominal operating cell temperature [C]

Required: Required if module_model=2

Type:	float

sixpar_transient_thermal_model_unit_mass¶

Module unit mass [kg/m^2]

Required: Required if module_model=2

Type:	float

sixpar_vmp¶

Maximum power point voltage [V]

Required: Required if module_model=2

The value of the following variables depends on sixpar_vmp:

inverter_count

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

sixpar_voc¶

Voc [V]

Required: Required if module_model=2

The value of the following variables depends on sixpar_voc:

6par_bvoc

inverter_count

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

SandiaPVArrayPerformanceModelWithModuleDatabase Group¶

class PySAM.Pvsamv1.Pvsamv1.SandiaPVArrayPerformanceModelWithModuleDatabase¶

assign(dict) → None¶

Assign attributes from dictionary, overwriting but not removing values.

SandiaPVArrayPerformanceModelWithModuleDatabase_vals = { var: val, ...}

export() → dict¶: Export attributes into dictionary.

replace(dict) → None¶

Replace attributes from dictionary, unassigning values not present in input dict.

SandiaPVArrayPerformanceModelWithModuleDatabase_vals = { var: val, ...}

snl_a¶

Temperature coefficient a

Required: Required if module_model=3

The value of the following variables depends on snl_a:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_a0¶

Air mass polynomial coeff 0

Required: Required if module_model=3

The value of the following variables depends on snl_a0:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_a1¶

Air mass polynomial coeff 1

Required: Required if module_model=3

The value of the following variables depends on snl_a1:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_a2¶

Air mass polynomial coeff 2

Required: Required if module_model=3

The value of the following variables depends on snl_a2:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_a3¶

Air mass polynomial coeff 3

Required: Required if module_model=3

The value of the following variables depends on snl_a3:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_a4¶

Air mass polynomial coeff 4

Required: Required if module_model=3

The value of the following variables depends on snl_a4:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_aimp¶

Max power point current temperature coefficient

Required: Required if module_model=3

The value of the following variables depends on snl_aimp:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_aisc¶

Short circuit current temperature coefficient

Required: Required if module_model=3

The value of the following variables depends on snl_aisc:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_area¶

Module area

Required: Required if module_model=3

The value of the following variables depends on snl_area:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_b¶

Temperature coefficient b

Required: Required if module_model=3

The value of the following variables depends on snl_b:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_b0¶

Incidence angle modifier polynomial coeff 0

Required: Required if module_model=3

The value of the following variables depends on snl_b0:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_b1¶

Incidence angle modifier polynomial coeff 1

Required: Required if module_model=3

The value of the following variables depends on snl_b1:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_b2¶

Incidence angle modifier polynomial coeff 2

Required: Required if module_model=3

The value of the following variables depends on snl_b2:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_b3¶

Incidence angle modifier polynomial coeff 3

Required: Required if module_model=3

The value of the following variables depends on snl_b3:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_b4¶

Incidence angle modifier polynomial coeff 4

Required: Required if module_model=3

The value of the following variables depends on snl_b4:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_b5¶

Incidence angle modifier polynomial coeff 5

Required: Required if module_model=3

The value of the following variables depends on snl_b5:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_bvmpo¶

Max power point voltage temperature coefficient

Required: Required if module_model=3

The value of the following variables depends on snl_bvmpo:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_bvoco¶

Open circuit voltage temperature coefficient

Required: Required if module_model=3

The value of the following variables depends on snl_bvoco:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_c0¶

C0

Required: Required if module_model=3

The value of the following variables depends on snl_c0:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_c1¶

C1

Required: Required if module_model=3

The value of the following variables depends on snl_c1:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_c2¶

C2

Required: Required if module_model=3

The value of the following variables depends on snl_c2:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_c3¶

C3

Required: Required if module_model=3

The value of the following variables depends on snl_c3:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_c4¶

C4

Required: Required if module_model=3

Type:	float

snl_c5¶

C5

Required: Required if module_model=3

Type:	float

snl_c6¶

C6

Required: Required if module_model=3

Type:	float

snl_c7¶

C7

Required: Required if module_model=3

Type:	float

snl_dtc¶

Temperature coefficient dT

Required: Required if module_model=3

The value of the following variables depends on snl_dtc:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_fd¶

Diffuse fraction

Required: Required if module_model=3

The value of the following variables depends on snl_fd:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_impo¶

Max power point current

Required: Required if module_model=3

The value of the following variables depends on snl_impo:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_isco¶

Short circuit current

Required: Required if module_model=3

The value of the following variables depends on snl_isco:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_ixo¶

Ix midpoint current

Required: Required if module_model=3

Type:	float

snl_ixxo¶

Ixx midpoint current

Required: Required if module_model=3

Type:	float

snl_mbvmp¶

Irradiance dependence of Vmp temperature coefficient

Required: Required if module_model=3

The value of the following variables depends on snl_mbvmp:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_mbvoc¶

Irradiance dependence of Voc temperature coefficient

Required: Required if module_model=3

The value of the following variables depends on snl_mbvoc:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_module_structure¶

Module and mounting structure configuration

Options: 0=Use Database Values,1=glass/cell/polymer sheet-open rack,2=glass/cell/glass-open rack,3=polymer/thin film/steel-open rack,4=Insulated back BIPV,5=close roof mount,6=user-defined

Constraints: INTEGER,MIN=0,MAX=6

Required: Required if module_model=3

The value of the following variables depends on snl_module_structure:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_n¶

Diode factor

Required: Required if module_model=3

The value of the following variables depends on snl_n:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_ref_a¶

User-specified a

Required: Required if module_model=3

The value of snl_ref_a depends on the following variables:

snl_a

snl_a0

snl_a1

snl_a2

snl_a3

snl_a4

snl_aimp

snl_aisc

snl_area

snl_b

snl_b0

snl_b1

snl_b2

snl_b3

snl_b4

snl_b5

snl_bvmpo

snl_bvoco

snl_c0

snl_c1

snl_c2

snl_c3

snl_dtc

snl_fd

snl_impo

snl_isco

snl_mbvmp

snl_mbvoc

snl_module_structure

snl_n

snl_series_cells

snl_vmpo

snl_voco

Type:	float

snl_ref_b¶

User-specified b

Required: Required if module_model=3

The value of snl_ref_b depends on the following variables:

snl_a

snl_a0

snl_a1

snl_a2

snl_a3

snl_a4

snl_aimp

snl_aisc

snl_area

snl_b

snl_b0

snl_b1

snl_b2

snl_b3

snl_b4

snl_b5

snl_bvmpo

snl_bvoco

snl_c0

snl_c1

snl_c2

snl_c3

snl_dtc

snl_fd

snl_impo

snl_isco

snl_mbvmp

snl_mbvoc

snl_module_structure

snl_n

snl_series_cells

snl_vmpo

snl_voco

Type:	float

snl_ref_dT¶

User-specified dT

Required: Required if module_model=3

The value of snl_ref_dT depends on the following variables:

snl_a

snl_a0

snl_a1

snl_a2

snl_a3

snl_a4

snl_aimp

snl_aisc

snl_area

snl_b

snl_b0

snl_b1

snl_b2

snl_b3

snl_b4

snl_b5

snl_bvmpo

snl_bvoco

snl_c0

snl_c1

snl_c2

snl_c3

snl_dtc

snl_fd

snl_impo

snl_isco

snl_mbvmp

snl_mbvoc

snl_module_structure

snl_n

snl_series_cells

snl_vmpo

snl_voco

Type:	float

snl_series_cells¶

Number of cells in series

Constraints: INTEGER

Required: Required if module_model=3

The value of the following variables depends on snl_series_cells:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_transient_thermal_model_unit_mass¶

Module unit mass [kg/m^2]

Required: Required if module_model=3

Type:	float

snl_vmpo¶

Max power point voltage

Required: Required if module_model=3

The value of the following variables depends on snl_vmpo:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

snl_voco¶

Open circuit voltage

Required: Required if module_model=3

The value of the following variables depends on snl_voco:

inverter_count

snl_ref_a

snl_ref_b

snl_ref_dT

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

IEC61853SingleDiodeModel Group¶

class PySAM.Pvsamv1.Pvsamv1.IEC61853SingleDiodeModel¶

assign(dict) → None¶

Assign attributes from dictionary, overwriting but not removing values.

IEC61853SingleDiodeModel_vals = { var: val, ...}

export() → dict¶: Export attributes into dictionary.

replace(dict) → None¶

Replace attributes from dictionary, unassigning values not present in input dict.

IEC61853SingleDiodeModel_vals = { var: val, ...}

sd11par_AMa0¶

Air mass modifier coeff 0

Required: Required if module_model=4

Type:	float

sd11par_AMa1¶

Air mass modifier coeff 1

Required: Required if module_model=4

Type:	float

sd11par_AMa2¶

Air mass modifier coeff 2

Required: Required if module_model=4

Type:	float

sd11par_AMa3¶

Air mass modifier coeff 3

Required: Required if module_model=4

Type:	float

sd11par_AMa4¶

Air mass modifier coeff 4

Required: Required if module_model=4

Type:	float

sd11par_Egref¶

Bandgap voltage [eV]

Required: Required if module_model=4

Type:	float

sd11par_Il¶

Light current [A]

Required: Required if module_model=4

Type:	float

sd11par_Imp0¶

Imp (STC) [A]

Required: Required if module_model=4

Type:	float

sd11par_Io¶

Saturation current [A]

Required: Required if module_model=4

Type:	float

sd11par_Isc0¶

Isc (STC) [A]

Required: Required if module_model=4

Type:	float

sd11par_Vmp0¶

Vmp (STC) [V]

Required: Required if module_model=4

The value of the following variables depends on sd11par_Vmp0:

inverter_count

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

sd11par_Voc0¶

Voc (STC) [V]

Required: Required if module_model=4

The value of the following variables depends on sd11par_Voc0:

inverter_count

subarray1_modules_per_string

subarray1_nstrings

subarray2_enable

subarray3_enable

subarray4_enable

system_capacity

Type:	float

sd11par_alphaIsc¶

Short curcuit current temperature coefficient [A/C]

Required: Required if module_model=4

Type:	float

sd11par_area¶

Module area [m2]

Required: Required if module_model=4

Type:	float

sd11par_c1¶

Rsh fit parameter 1

Required: Required if module_model=4

Type:	float

sd11par_c2¶

Rsh fit parameter 2

Required: Required if module_model=4

Type:	float

sd11par_c3¶

Rsh fit parameter 3

Required: Required if module_model=4

Type:	float

sd11par_d1¶

Rs fit parameter 1

Required: Required if module_model=4

Type:	float

sd11par_d2¶

Rs fit parameter 2

Required: Required if module_model=4

Type:	float

sd11par_d3¶

Rs fit parameter 3

Required: Required if module_model=4

Type:	float

sd11par_glass¶

Module cover glass type

Options: 0=normal,1=AR glass

Required: Required if module_model=4

Type:	float

sd11par_mounting¶

Array mounting height

Options: 0=one story,1=two story

Constraints: INTEGER,MIN=0,MAX=1

Required: Required if module_model=4

Type:	float

sd11par_n¶

Diode nonideality factor

Required: Required if module_model=4

Type:	float

sd11par_nser¶

Nseries

Constraints: INTEGER,POSITIVE

Required: Required if module_model=4

Type:	float

sd11par_standoff¶

Standoff mode

Options: 0=bipv,1=>3.5in,2=2.5-3.5in,3=1.5-2.5in,4=0.5-1.5in,5=<0.5in,6=ground/rack

Constraints: INTEGER,MIN=0,MAX=6

Required: Required if module_model=4

Type:	float

sd11par_tnoct¶

Nominal operating cell temperature [C]

Required: Required if module_model=4

Type:	float

MermoudLejeuneSingleDiodeModel Group¶

class PySAM.Pvsamv1.Pvsamv1.MermoudLejeuneSingleDiodeModel¶

assign(dict) → None¶

Assign attributes from dictionary, overwriting but not removing values.

MermoudLejeuneSingleDiodeModel_vals = { var: val, ...}

export() → dict¶: Export attributes into dictionary.

replace(dict) → None¶

Replace attributes from dictionary, unassigning values not present in input dict.

MermoudLejeuneSingleDiodeModel_vals = { var: val, ...}

mlm_AM_c_lp0¶

Coefficient 0 for Lee/Panchula Air Mass Modifier [-]