WindObos
WindObos
- PySAM.WindObos.default(config) WindObos
Load defaults for the configuration
config
. Available configurations are:None
Note
Some inputs do not have default values and may be assigned a value from the variable’s Required attribute. See variable attribute descriptions below.
- PySAM.WindObos.from_existing(data, optional config) WindObos
Share data with an existing PySAM class. If
optional config
is a valid configuration name, load the module’s defaults for that configuration.
- PySAM.WindObos.wrap(ssc_data_t) WindObos
Load data from a PySSC object.
Warning
Do not call PySSC.data_free on the ssc_data_t provided to
wrap()
WindObos is a wrapper for the SSC compute module cmod_wind_obos.cpp
Interdependent Variables
The variables listed below are interdependent with other variables. If you change the value of one of these variables, you may need to change values of other variables. The SAM user interface manages these interdependent variables, but in PySAM, it is up to you change the value of all interdependent variables so they are consistent. See Interdependent Variables for examples and details.
None
Functions
- class PySAM.WindObos.WindObos
This class contains all the variable information for running a simulation. Variables are grouped together in the subclasses as properties. If property assignments are the wrong type, an error is thrown.
- assign(dict) None
Assign attributes from nested dictionary, except for Outputs
nested_dict = { 'wobos': { var: val, ...}, ...}
- execute(int verbosity) None
Execute simulation with verbosity level 0 (default) or 1
- export() dict
Export attributes into nested dictionary
- get_data_ptr() Pointer
Get ssc_data_t pointer
- replace(dict) None
Replace attributes from nested dictionary, except for Outputs. Unassigns all values in each Group then assigns from the input dict.
nested_dict = { 'wobos': { var: val, ...}, ...}
- unassign(name) None
Unassign a value in any of the variable groups.
- value(name, optional value) None | float | dict | sequence | str
Get or set by name a value in any of the variable groups.
Wobos Group
- class PySAM.WindObos.WindObos.Wobos
- assign(dict) None
Assign attributes from dictionary, overwriting but not removing values.
Wobos_vals = { var: val, ...}
- export() dict
Export attributes into dictionary.
- replace(dict) None
Replace attributes from dictionary, unassigning values not present in input
dict
.Wobos_vals = { var: val, ...}
- addLocPerm
Additional State and Local Permitting Cost [$]
Required: False. Automatically set to 200000 if not assigned explicitly or loaded from defaults.
- Type:
float
- anchor
Anchor Type
Constraints: INTEGER
Required: False. Automatically set to DRAGEMBEDMENT if not assigned explicitly or loaded from defaults.
- Type:
float
- arrCab1Mass
Array cable 1 mass [kg/m]
Required: False. Automatically set to 20.384 if not assigned explicitly or loaded from defaults.
- Type:
float
- arrCab2Mass
Array cable 2 mass [kg/m]
Required: False. Automatically set to 21.854 if not assigned explicitly or loaded from defaults.
- Type:
float
- arrVoltage
Array cable voltage [kV]
Required: False. Automatically set to 33 if not assigned explicitly or loaded from defaults.
- Type:
float
- arrayCables
Inter-array cables to consider by voltage [kV]
Required: False. Automatically set to 33 66 if not assigned explicitly or loaded from defaults.
- Type:
str
- arrayX
Spacing Between Turbine Rows [rotor diameters]
Constraints: MIN=1
Required: False. Automatically set to 9 if not assigned explicitly or loaded from defaults.
- Type:
float
- arrayY
Spacing Between Turbines in Rows [rotor diameters]
Constraints: MIN=1
Required: False. Automatically set to 9 if not assigned explicitly or loaded from defaults.
- Type:
float
- backUpGen
Back up Diesel Generator Cost [$]
Required: False. Automatically set to 1000000 if not assigned explicitly or loaded from defaults.
- Type:
float
- ballCR
Floating Ballast Cost Rate [$/tonne]
Required: False. Automatically set to 100 if not assigned explicitly or loaded from defaults.
- Type:
float
- bioResStudyMet
Biological Resource Study Met Tower Cost [$]
Required: False. Automatically set to 1500000 if not assigned explicitly or loaded from defaults.
- Type:
float
- bioResStudyProj
Biological Resource Study Porject Cost [$]
Required: False. Automatically set to 500000 if not assigned explicitly or loaded from defaults.
- Type:
float
- bladeL
Blade Length [m]
Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.
- Type:
float
- boltBlade1
Lift and Bolt Blade Individual Components Method [hours]
Required: False. Automatically set to 3.5 if not assigned explicitly or loaded from defaults.
- Type:
float
- boltBlade2
Lift and Bolt Blade Bunny Ears Method [hours]
Required: False. Automatically set to 3.5 if not assigned explicitly or loaded from defaults.
- Type:
float
- boltNacelle1
Lift and Bolt Nacelle Individual Components Method [hours]
Required: False. Automatically set to 7 if not assigned explicitly or loaded from defaults.
- Type:
float
- boltNacelle2
Lift and Bolt Nacelle Bunny Ears Method [hours]
Required: False. Automatically set to 7 if not assigned explicitly or loaded from defaults.
- Type:
float
- boltNacelle3
Lift and Bolt Nacelle Fully Assembled Rotor Method [hours]
Required: False. Automatically set to 7 if not assigned explicitly or loaded from defaults.
- Type:
float
- boltRotor
Lift and Bolt Rotor Fully Assembled Rotor Method [hours]
Required: False. Automatically set to 7 if not assigned explicitly or loaded from defaults.
- Type:
float
- boltTower
Lift and Bolt Tower Section [hours]
Required: False. Automatically set to 7 if not assigned explicitly or loaded from defaults.
- Type:
float
- buryDepth
Electrical Cable Burial Depth [m]
Constraints: MIN=0,MAX=15
Required: False. Automatically set to 2 if not assigned explicitly or loaded from defaults.
- Type:
float
- buryFac
Cable Burial Depth Factor [1/m]
Required: False. Automatically set to 0.1 if not assigned explicitly or loaded from defaults.
- Type:
float
- buryRate
Cable Burial Rate [m/hour]
Required: False. Automatically set to 125 if not assigned explicitly or loaded from defaults.
- Type:
float
- cab1CR
Array cable 1 Cost Rate [$/m]
Required: False. Automatically set to 185.889 if not assigned explicitly or loaded from defaults.
- Type:
float
- cab1CurrRating
Array cable 1 current rating [A]
Required: False. Automatically set to 300 if not assigned explicitly or loaded from defaults.
- Type:
float
- cab1TurbInterCR
Cable 1 turbine interface cost [$/interface]
Required: False. Automatically set to 8410 if not assigned explicitly or loaded from defaults.
- Type:
float
- cab2CR
Array cable 2 Cost Rate [$/m]
Required: False. Automatically set to 202.788 if not assigned explicitly or loaded from defaults.
- Type:
float
- cab2CurrRating
Array cable 2 current rating [A]
Required: False. Automatically set to 340 if not assigned explicitly or loaded from defaults.
- Type:
float
- cab2SubsInterCR
Cable 2 substation interface cost [$/interface]
Required: False. Automatically set to 19815 if not assigned explicitly or loaded from defaults.
- Type:
float
- cab2TurbInterCR
Cable 2 turbine interface cost [$/interface]
Required: False. Automatically set to 8615 if not assigned explicitly or loaded from defaults.
- Type:
float
- cabDrillCR
Cost Rate for Horizontal Drilling [$/m]
Required: False. Automatically set to 3200 if not assigned explicitly or loaded from defaults.
- Type:
float
- cabDrillDist
Horizontal Drilling distance for Cable Landfall [m]
Required: False. Automatically set to 500 if not assigned explicitly or loaded from defaults.
- Type:
float
- cabLoadout
Array Cable Loadout for Installation [hours]
Required: False. Automatically set to 14 if not assigned explicitly or loaded from defaults.
- Type:
float
- cabPullIn
Array Cable Pull in to Interfaces [hours]
Required: False. Automatically set to 5.5 if not assigned explicitly or loaded from defaults.
- Type:
float
- cabSurveyCR
Cable Route Survey Cost [$/m]
Required: False. Automatically set to 240 if not assigned explicitly or loaded from defaults.
- Type:
float
- cabTerm
Cable Termination and Testing [hours]
Required: False. Automatically set to 5.5 if not assigned explicitly or loaded from defaults.
- Type:
float
- cableOptimizer
Electrical Cable Cost Optimization
Constraints: INTEGER
Required: False. Automatically set to FALSE if not assigned explicitly or loaded from defaults.
- Type:
float
- capital_cost_year_0
Capital cost spent in year 0
Required: False. Automatically set to 0.2 if not assigned explicitly or loaded from defaults.
- Type:
float
- capital_cost_year_1
Capital cost spent in year 1
Required: False. Automatically set to 0.6 if not assigned explicitly or loaded from defaults.
- Type:
float
- capital_cost_year_2
Capital cost spent in year 2
Required: False. Automatically set to 0.1 if not assigned explicitly or loaded from defaults.
- Type:
float
- capital_cost_year_3
Capital cost spent in year 3
Required: False. Automatically set to 0.1 if not assigned explicitly or loaded from defaults.
- Type:
float
- capital_cost_year_4
Capital cost spent in year 4
Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.
- Type:
float
- capital_cost_year_5
Capital cost spent in year 5
Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.
- Type:
float
- catLengFac
Catenary Cable Length Factor
Required: False. Automatically set to 0.04 if not assigned explicitly or loaded from defaults.
- Type:
float
- chord
Blade Max Chord [m]
Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.
- Type:
float
- civilWork
Onshore Infrastructure Civil Work Cost [$]
Required: False. Automatically set to 40000 if not assigned explicitly or loaded from defaults.
- Type:
float
- cleanWatAct402
Clean Water Act Section 402 Compliance Cost [$]
Required: False. Automatically set to 100000 if not assigned explicitly or loaded from defaults.
- Type:
float
- cleanWatAct404
Clean Water Act Section 404 Compliance Cost [$]
Required: False. Automatically set to 100000 if not assigned explicitly or loaded from defaults.
- Type:
float
- coastZoneManAct
Coastal Zone Management Act Compliance Cost [$]
Required: False. Automatically set to 100000 if not assigned explicitly or loaded from defaults.
- Type:
float
- compRacks
Component Racks Cost [$]
Required: False. Automatically set to 1000000 if not assigned explicitly or loaded from defaults.
- Type:
float
- conOpPlan
Construction Operations Plan Cost [$]
Required: False. Automatically set to 1000000 if not assigned explicitly or loaded from defaults.
- Type:
float
- construction_insurance
Insurance During Construction (% of ICC)
Required: False. Automatically set to 0.01 if not assigned explicitly or loaded from defaults.
- Type:
float
- crane1000DR
1000 t Crawler Crane Day Rate [$/day]
Required: False. Automatically set to 8000 if not assigned explicitly or loaded from defaults.
- Type:
float
- crane600DR
600 t Crawler Crane Day Rate [$/day]
Required: False. Automatically set to 5000 if not assigned explicitly or loaded from defaults.
- Type:
float
- craneMobDemob
Port Crane Mobilization/Demobilization Cost [$]
Required: False. Automatically set to 150000 if not assigned explicitly or loaded from defaults.
- Type:
float
- deaFixLeng
Fixed Mooring Length for Drag Embedment Anchors [m]
Required: False. Automatically set to 500 if not assigned explicitly or loaded from defaults.
- Type:
float
- decomDiscRate
Decommissioning Cost Discount Rate
Required: False. Automatically set to 0.03 if not assigned explicitly or loaded from defaults.
- Type:
float
- distAtoS
Distance form Inshore Assembly Area to Site [km]
Constraints: MIN=5,MAX=1000
Required: False. Automatically set to 90 if not assigned explicitly or loaded from defaults.
- Type:
float
- distInterCon
Distance Over Land to Grid Interconnect [miles]
Required: False. Automatically set to 3 if not assigned explicitly or loaded from defaults.
- Type:
float
- distPort
Distance from Installation Port to Site [km]
Constraints: MIN=5,MAX=1000
Required: False. Automatically set to 90 if not assigned explicitly or loaded from defaults.
- Type:
float
- distPtoA
Distance from Installation Port to Inshore Assembly Area [km]
Constraints: MIN=5,MAX=1000
Required: False. Automatically set to 90 if not assigned explicitly or loaded from defaults.
- Type:
float
- distShore
Distance to Landfall [km]
Constraints: MIN=5,MAX=1000
Required: False. Automatically set to 90 if not assigned explicitly or loaded from defaults.
- Type:
float
- diveTeamDR
Cable Landfall Dive Team Day Rate [$/day]
Required: False. Automatically set to 3200 if not assigned explicitly or loaded from defaults.
- Type:
float
- dockRate
Quayside Docking Cost Rate [$/day]
Required: False. Automatically set to 3000 if not assigned explicitly or loaded from defaults.
- Type:
float
- dynCabFac
Dynamic Cable Cost Premium Factor
Required: False. Automatically set to 2 if not assigned explicitly or loaded from defaults.
- Type:
float
- elecCont
Electrical Install Weather Contingency [%]
Required: False. Automatically set to 0.3 if not assigned explicitly or loaded from defaults.
- Type:
float
- elecWork
Onshore Infrastructure Electrical Work Cost [$]
Required: False. Automatically set to 25000 if not assigned explicitly or loaded from defaults.
- Type:
float
- endSpecAct
Endangered Species Act Compliance Cost [$]
Required: False. Automatically set to 500000 if not assigned explicitly or loaded from defaults.
- Type:
float
- entranceExitRate
Port Entrance and Exit Cost Rate [$/occurrence]
Required: False. Automatically set to 0.525 if not assigned explicitly or loaded from defaults.
- Type:
float
- estEnMFac
Estimated Engineering & Management Cost Factor
Required: False. Automatically set to 0.04 if not assigned explicitly or loaded from defaults.
- Type:
float
- exCabFac
Excess Cable Factor
Required: False. Automatically set to 0.1 if not assigned explicitly or loaded from defaults.
- Type:
float
- expCabCR
Export cable cost rate [$/m]
Required: False. Automatically set to 495.411 if not assigned explicitly or loaded from defaults.
- Type:
float
- expCabLoad
Export Cable Loadout for Installation [hours]
Required: False. Automatically set to 24 if not assigned explicitly or loaded from defaults.
- Type:
float
- expCabMass
Export cable mass [kg/m]
Required: False. Automatically set to 71.9 if not assigned explicitly or loaded from defaults.
- Type:
float
- expCurrRating
Export cable current rating [A]
Required: False. Automatically set to 530 if not assigned explicitly or loaded from defaults.
- Type:
float
- expSubsInterCR
Export cable substation interface cost [$/interface]
Required: False. Automatically set to 57500 if not assigned explicitly or loaded from defaults.
- Type:
float
- expVoltage
Export cable voltage [kV]
Required: False. Automatically set to 220 if not assigned explicitly or loaded from defaults.
- Type:
float
- exportCables
Export cables to consider by voltage [kV]
Required: False. Automatically set to 132 220 if not assigned explicitly or loaded from defaults.
- Type:
str
- faaPlan
Federal Aviation Administration Plans & Mitigation Cost [$]
Required: False. Automatically set to 10000 if not assigned explicitly or loaded from defaults.
- Type:
float
- feedStudy
FEED Study Cost [$]
Required: False. Automatically set to 10000000 if not assigned explicitly or loaded from defaults.
- Type:
float
- groutSpreadDR
Grouting Spread Day Rate [$/day]
Required: False. Automatically set to 3000 if not assigned explicitly or loaded from defaults.
- Type:
float
- groutSpreadMob
Grouting Spread Mobilization Cost [$]
Required: False. Automatically set to 1000000 if not assigned explicitly or loaded from defaults.
- Type:
float
- groutTP
Grout Transition Piece/Monopile Interface [hours]
Required: False. Automatically set to 8 if not assigned explicitly or loaded from defaults.
- Type:
float
- hamRate
Pile Hammer Rate [m/hour]
Required: False. Automatically set to 20 if not assigned explicitly or loaded from defaults.
- Type:
float
- highVoltSG
High Voltage Switchgear Cost [$]
Required: False. Automatically set to 950000 if not assigned explicitly or loaded from defaults.
- Type:
float
- hubD
Hub Diameter [m]
Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.
- Type:
float
- hubH
Hub Height [m]
Required: False. Automatically set to 90 if not assigned explicitly or loaded from defaults.
- Type:
float
- inspectClear
Inspection Clearance [m]
Required: False. Automatically set to 2 if not assigned explicitly or loaded from defaults.
- Type:
float
- instScour
Install Scour Protection Around Monopile Base [hours]
Required: False. Automatically set to 6 if not assigned explicitly or loaded from defaults.
- Type:
float
- installStrategy
Installation Vessel Strategy
Constraints: INTEGER
Required: False. Automatically set to PRIMARYVESSEL if not assigned explicitly or loaded from defaults.
- Type:
float
- install_contingency
Installation Contingency
Required: False. Automatically set to 0.3 if not assigned explicitly or loaded from defaults.
- Type:
float
- interConVolt
Grid Interconnect Voltage [kV]
Required: False. Automatically set to 345 if not assigned explicitly or loaded from defaults.
- Type:
float
- interest_during_construction
Interest During Construction
Required: False. Automatically set to 0.08 if not assigned explicitly or loaded from defaults.
- Type:
float
- jackFasten
Prepare and Fasten Jacket for Transport [hours/unit]
Required: False. Automatically set to 20 if not assigned explicitly or loaded from defaults.
- Type:
float
- jlatticeA
Jacket Main Lattice Footprint Area [m^2]
Required: False. Automatically set to 26 if not assigned explicitly or loaded from defaults.
- Type:
float
- jlatticeCR
Jacket Main Lattice Cost Rate [$/tonne]
Required: False. Automatically set to 4680 if not assigned explicitly or loaded from defaults.
- Type:
float
- jpileCR
Jacket Pile Cost Rate [$/tonne]
Required: False. Automatically set to 2250 if not assigned explicitly or loaded from defaults.
- Type:
float
- jpileD
Jacket Pile Diameter [m]
Required: False. Automatically set to 1.6 if not assigned explicitly or loaded from defaults.
- Type:
float
- jpileL
Jacket Pile Length [m]
Required: False. Automatically set to 47.5 if not assigned explicitly or loaded from defaults.
- Type:
float
- jtransCR
Jacket Transition Piece Cost Rate [$/tonne]
Required: False. Automatically set to 4500 if not assigned explicitly or loaded from defaults.
- Type:
float
- landConstruct
Onshore Infrastructure Construction [days]
Required: False. Automatically set to 7 if not assigned explicitly or loaded from defaults.
- Type:
float
- laydownCR
Laydown and Storage Cost Rate [$/m^2/day]
Required: False. Automatically set to 0.25 if not assigned explicitly or loaded from defaults.
- Type:
float
- levJack
Level Jacket Main Lattice [hours]
Required: False. Automatically set to 24 if not assigned explicitly or loaded from defaults.
- Type:
float
- marMamProtAct
Marine Mammal Protection Act Compliance Cost [$]
Required: False. Automatically set to 500000 if not assigned explicitly or loaded from defaults.
- Type:
float
- medVoltSG
Medium Voltage Switchgear Cost [$]
Required: False. Automatically set to 500000 if not assigned explicitly or loaded from defaults.
- Type:
float
- metTowCR
Meteorological (Met Tower Fabrication & Install Cost [$/MW]
Required: False. Automatically set to 11518 if not assigned explicitly or loaded from defaults.
- Type:
float
- migBirdAct
Migratory Bird Treaty Compliance Cost [$]
Required: False. Automatically set to 500000 if not assigned explicitly or loaded from defaults.
- Type:
float
- monoFasten
Prepare and Fasten Monopile for Transport [hours/unit]
Required: False. Automatically set to 12 if not assigned explicitly or loaded from defaults.
- Type:
float
- moorCR
Mooring Line Cost Rate [$/m]
Constraints: MIN=399
Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.
- Type:
float
- moorCost
Capital cost of mooring lines and anchors [$]
Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.
- Type:
float
- moorDia
Mooring Line Diameter [m]
Constraints: MIN=0.09
Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.
- Type:
float
- moorLines
Number Of Mooring Lines
Required: False. Automatically set to 3 if not assigned explicitly or loaded from defaults.
- Type:
float
- moorLoadout
Anchor & Mooring Loadout Time [hours]
Required: False. Automatically set to 5 if not assigned explicitly or loaded from defaults.
- Type:
float
- moorSurvey
Survey Mooring Lines & Anchor Positions Time [hours]
Required: False. Automatically set to 4 if not assigned explicitly or loaded from defaults.
- Type:
float
- moorTimeFac
Anchor & Mooring Water Depth Time Factor
Required: False. Automatically set to 0.005 if not assigned explicitly or loaded from defaults.
- Type:
float
- mpEmbedL
Monopile Embedment Length [m]
Required: False. Automatically set to 30 if not assigned explicitly or loaded from defaults.
- Type:
float
- mpileCR
Monopile Cost Rate [$/tonne]
Required: False. Automatically set to 2250 if not assigned explicitly or loaded from defaults.
- Type:
float
- mpileD
Monopile Diameter [m]
Constraints: MIN=0.01
Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.
- Type:
float
- mpileL
Monopile Length [m]
Constraints: MIN=0.01
Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.
- Type:
float
- mptCR
Main Power Transformer Cost Rate [$/MVA]
Required: False. Automatically set to 12500 if not assigned explicitly or loaded from defaults.
- Type:
float
- mpvRentalDR
MPV Rental Day Rate [$/day]
Required: False. Automatically set to 72000 if not assigned explicitly or loaded from defaults.
- Type:
float
- mtransCR
Monopile Transition Piece Cost Rate [$/tonne]
Required: False. Automatically set to 3230 if not assigned explicitly or loaded from defaults.
- Type:
float
- nCrane1000
Number of 1000 t Crawler Cranes
Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.
- Type:
float
- nCrane600
Number of 600 t Crawler Cranes
Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.
- Type:
float
- nTurb
Number of Turbines
Constraints: MIN=2,MAX=200
Required: False. Automatically set to 20 if not assigned explicitly or loaded from defaults.
- Type:
float
- nacelleL
Nacelle Length [m]
Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.
- Type:
float
- nacelleW
Nacelle Width [m]
Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.
- Type:
float
- natHisPresAct
National Historic Preservation Act Compliance Cost [$]
Required: False. Automatically set to 250000 if not assigned explicitly or loaded from defaults.
- Type:
float
Navigation and Transport Study Met Tower Cost [$]
Required: False. Automatically set to 500000 if not assigned explicitly or loaded from defaults.
- Type:
float
Navigation and Transport Study Project Cost [$]
Required: False. Automatically set to 250000 if not assigned explicitly or loaded from defaults.
- Type:
float
- nepaEisMet
NEPA Environmental Impact Statement Met Tower Cost [$]
Required: False. Automatically set to 2000000 if not assigned explicitly or loaded from defaults.
- Type:
float
- nepaEisProj
NEPA Environmental Impact Study Project Cost [$]
Required: False. Automatically set to 5000000 if not assigned explicitly or loaded from defaults.
- Type:
float
- number_install_seasons
Number of Installation Seasons
Required: False. Automatically set to 1 if not assigned explicitly or loaded from defaults.
- Type:
float
- otherAncillary
Other Ancillary Systems Costs [$]
Required: False. Automatically set to 3000000 if not assigned explicitly or loaded from defaults.
- Type:
float
- outConShelfLease
Outer Continental Shelf Lease Cost [$]
Required: False. Automatically set to 1000000 if not assigned explicitly or loaded from defaults.
- Type:
float
- physResStudyMet
Physical Resource Study Met Tower Cost [$]
Required: False. Automatically set to 1500000 if not assigned explicitly or loaded from defaults.
- Type:
float
- physResStudyProj
Physical Resource Study Project Cost [$]
Required: False. Automatically set to 500000 if not assigned explicitly or loaded from defaults.
- Type:
float
- pileSpreadDR
Piling Spread Day Rate [$/day]
Required: False. Automatically set to 2500 if not assigned explicitly or loaded from defaults.
- Type:
float
- pileSpreadMob
Piling Spread Mobilization Cost [$]
Required: False. Automatically set to 750000 if not assigned explicitly or loaded from defaults.
- Type:
float
- placeJack
Place Jacket Main Lattice onto Piles [hours]
Required: False. Automatically set to 12 if not assigned explicitly or loaded from defaults.
- Type:
float
- placeMP
Lift and Place Monopile for Hammering [hours]
Required: False. Automatically set to 3 if not assigned explicitly or loaded from defaults.
- Type:
float
- placePiles
Place Jacket Piles [hours]
Required: False. Automatically set to 12 if not assigned explicitly or loaded from defaults.
- Type:
float
- placeTP
Place Transition Piece onto Monopile [hours]
Required: False. Automatically set to 3 if not assigned explicitly or loaded from defaults.
- Type:
float
- placeTemplate
Place Jacket Pile Template on Seabed [hours]
Required: False. Automatically set to 4 if not assigned explicitly or loaded from defaults.
- Type:
float
- placeTop
Lift and Place Offshore Substation Topside [hours]
Required: False. Automatically set to 24 if not assigned explicitly or loaded from defaults.
- Type:
float
- plantComm
Plant Commissioning Cost Factor
Required: False. Automatically set to 0.01 if not assigned explicitly or loaded from defaults.
- Type:
float
- preFEEDStudy
Pre-FEED study Cost [$]
Required: False. Automatically set to 5000000 if not assigned explicitly or loaded from defaults.
- Type:
float
- prepAA
Prepare Inshore Assembly Area For Turbine Installation [hours]
Required: False. Automatically set to 168 if not assigned explicitly or loaded from defaults.
- Type:
float
- prepGripperJack
Prepare Jacket Gripper and Upender [hours]
Required: False. Automatically set to 8 if not assigned explicitly or loaded from defaults.
- Type:
float
- prepGripperMono
Prepare Monopile Gripper and Upender [hours]
Required: False. Automatically set to 1.5 if not assigned explicitly or loaded from defaults.
- Type:
float
- prepHamJack
Prepare Hammer for jacket Piles Installation [hours]
Required: False. Automatically set to 2 if not assigned explicitly or loaded from defaults.
- Type:
float
- prepHamMono
Prepare Hammer for Monopile Installation [hours]
Required: False. Automatically set to 2 if not assigned explicitly or loaded from defaults.
- Type:
float
- prepSemi
Prepare Semi-submersible for Turbine Installation [hours]
Required: False. Automatically set to 12 if not assigned explicitly or loaded from defaults.
- Type:
float
- prepSpar
Prepare Spar for Tow to Inshore Assembly Area [hours]
Required: False. Automatically set to 18 if not assigned explicitly or loaded from defaults.
- Type:
float
- prepTow
Prepare Floating Substructure for Tow to Site [hours]
Required: False. Automatically set to 12 if not assigned explicitly or loaded from defaults.
- Type:
float
- procurement_contingency
Procurement Contingency
Required: False. Automatically set to 0.05 if not assigned explicitly or loaded from defaults.
- Type:
float
- projLife
Project Economic Life [years]
Required: False. Automatically set to 20 if not assigned explicitly or loaded from defaults.
- Type:
float
- pwrFac
Power Transfer Efficiency Factor
Required: False. Automatically set to 0.95 if not assigned explicitly or loaded from defaults.
- Type:
float
- removeHamJack
Remove Hammer for Jacket Piles Installation [hours]
Required: False. Automatically set to 4 if not assigned explicitly or loaded from defaults.
- Type:
float
- removeHamMono
Remove Hammer for Monopile Installation [hours]
Required: False. Automatically set to 2 if not assigned explicitly or loaded from defaults.
- Type:
float
- rivsnHarbsAct
Rivers & Harbors Act Section 10 Compliance Cost [$]
Required: False. Automatically set to 100000 if not assigned explicitly or loaded from defaults.
- Type:
float
- rnaM
Rotor-Nacelle Assembly Mass [tonne]
Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.
- Type:
float
- rotorD
Rotor Diameter [m]
Required: False. Automatically set to 120 if not assigned explicitly or loaded from defaults.
- Type:
float
- sSteelCR
Secondary/Outfitting Steel Cost Rate [$/tonne]
Required: False. Automatically set to 7250 if not assigned explicitly or loaded from defaults.
- Type:
float
- saPlan
Site Assessment Plan Cost [$]
Required: False. Automatically set to 500000 if not assigned explicitly or loaded from defaults.
- Type:
float
- scourMat
Scour Protection Material Cost [$/location]
Required: False. Automatically set to 250000 if not assigned explicitly or loaded from defaults.
- Type:
float
- scrapVal
Total Scrap Value of Decommissioned Components [$]
Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.
- Type:
float
- seaSpreadDR
Suction Pile Anchor Spread Day Rate [$/day]
Required: False. Automatically set to 165000 if not assigned explicitly or loaded from defaults.
- Type:
float
- seaSpreadMob
Suction Pile Anchor Spread Mobilization Cost [$]
Required: False. Automatically set to 4500000 if not assigned explicitly or loaded from defaults.
- Type:
float
- shorePullIn
Cable Pull in to Onshore Infrastructure [hours]
Required: False. Automatically set to 96 if not assigned explicitly or loaded from defaults.
- Type:
float
- shuntCR
Shunt Reactor Cost Rate [$/MVA]
Required: False. Automatically set to 35000 if not assigned explicitly or loaded from defaults.
- Type:
float
- socEconStudyMet
Socioeconomic and Land use Study Met Tower Cost [$]
Required: False. Automatically set to 500000 if not assigned explicitly or loaded from defaults.
- Type:
float
- socEconStudyProj
Socioeconomic and Land use Study Project Cost [$]
Required: False. Automatically set to 200000 if not assigned explicitly or loaded from defaults.
- Type:
float
- spMoorCheck
Survey Spar Mooring Lines and Connections [hours]
Required: False. Automatically set to 16 if not assigned explicitly or loaded from defaults.
- Type:
float
- spMoorCon
Connect Mooring Lines to Spar [hours]
Required: False. Automatically set to 20 if not assigned explicitly or loaded from defaults.
- Type:
float
- spStifColCR
Spar Stiffened Column Cost Rate [$/tonne]
Required: False. Automatically set to 3120 if not assigned explicitly or loaded from defaults.
- Type:
float
- spTapColCR
Spar Tapered Column Cost Rate [$/tonne]
Required: False. Automatically set to 4220 if not assigned explicitly or loaded from defaults.
- Type:
float
- ssBall
Ballast Semi-submersible [hours]
Required: False. Automatically set to 6 if not assigned explicitly or loaded from defaults.
- Type:
float
- ssHeaveCR
Semi-submersible Heave Plate Cost Rate [$/tonne]
Required: False. Automatically set to 6250 if not assigned explicitly or loaded from defaults.
- Type:
float
- ssMoorCheck
Survey Semi-submersible Mooing Lines and Connections [hours]
Required: False. Automatically set to 12 if not assigned explicitly or loaded from defaults.
- Type:
float
- ssMoorCon
Connect Mooring Lines to Semi-Submersible [hours]
Required: False. Automatically set to 22 if not assigned explicitly or loaded from defaults.
- Type:
float
- ssStifColCR
Semi-submersible Stiffened Column Cost Rate [$/tonne]
Required: False. Automatically set to 3120 if not assigned explicitly or loaded from defaults.
- Type:
float
- ssTrussCR
Semi-submersible Truss Cost Rate [$/tonne]
Required: False. Automatically set to 6250 if not assigned explicitly or loaded from defaults.
- Type:
float
- stateLease
State Leasing and Permitting Cost [$]
Required: False. Automatically set to 250000 if not assigned explicitly or loaded from defaults.
- Type:
float
- subTotCost
Substructure & Foundation Total Cost [$]
Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.
- Type:
float
- subTotM
Total Substructure Mass per Turbine [tonne]
Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.
- Type:
float
- subsJackCR
Offshore Substation Jacket Lattice Cost Rate [$/tonne]
Required: False. Automatically set to 6250 if not assigned explicitly or loaded from defaults.
- Type:
float
- subsLoad
Offshore Substation Loadout for Installation [hours]
Required: False. Automatically set to 60 if not assigned explicitly or loaded from defaults.
- Type:
float
- subsPileCR
Offshore Substation Jacket Pile Cost Rate [$/tonne]
Required: False. Automatically set to 2250 if not assigned explicitly or loaded from defaults.
- Type:
float
- subsPullIn
Cable Pull in to Offshore Substation [hours]
Required: False. Automatically set to 48 if not assigned explicitly or loaded from defaults.
- Type:
float
- subsTopDes
Offshore Substation Design Cost [$]
Required: False. Automatically set to 4500000 if not assigned explicitly or loaded from defaults.
- Type:
float
- subsTopFab
Offshore Substation Fabrication Cost [$/tonne]
Required: False. Automatically set to 14500 if not assigned explicitly or loaded from defaults.
- Type:
float
- subsVessPos
Vessel Positioning Time Offshore Substation Installation [hours]
Required: False. Automatically set to 6 if not assigned explicitly or loaded from defaults.
- Type:
float
- substructCont
Substructure Install Weather Contingency [%]
Required: False. Automatically set to 0.3 if not assigned explicitly or loaded from defaults.
- Type:
float
- substructure
Substructure Type
Constraints: INTEGER
Required: False. Automatically set to MONOPILE if not assigned explicitly or loaded from defaults.
- Type:
float
- surfLayRate
Cable Surface Lay Rate [m/hour]
Required: False. Automatically set to 375 if not assigned explicitly or loaded from defaults.
- Type:
float
- tax_rate
Effective Tax Rate
Required: False. Automatically set to 0.4 if not assigned explicitly or loaded from defaults.
- Type:
float
- topAssemblyFac
Offshore Substation Land-based Assembly Factor
Required: False. Automatically set to 0.075 if not assigned explicitly or loaded from defaults.
- Type:
float
- towerD
Tower Base Diameter [m]
Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.
- Type:
float
- towerInstallMethod
Tower Installation Method
Constraints: INTEGER
Required: False. Automatically set to ONEPIECE if not assigned explicitly or loaded from defaults.
- Type:
float
- towerM
Tower Mass [tonne]
Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.
- Type:
float
- tpCover
Install Transition Piece Cover [hours]
Required: False. Automatically set to 1.5 if not assigned explicitly or loaded from defaults.
- Type:
float
- turbCapEx
Turbine Capital Cost [$/kW]
Required: False. Automatically set to 1605 if not assigned explicitly or loaded from defaults.
- Type:
float
- turbCont
Turbine Install Weather Contingency [%]
Required: False. Automatically set to 0.3 if not assigned explicitly or loaded from defaults.
- Type:
float
- turbFasten
Prepare and Fasten Turbine for Transport [hours/turbine]
Required: False. Automatically set to 8 if not assigned explicitly or loaded from defaults.
- Type:
float
- turbInstallMethod
Turbine Installation Method
Constraints: INTEGER
Required: False. Automatically set to INDIVIDUAL if not assigned explicitly or loaded from defaults.
- Type:
float
- turbR
Turbine Rating [MW]
Constraints: MIN=1,MAX=15
Required: False. Automatically set to 5 if not assigned explicitly or loaded from defaults.
- Type:
float
- upendSpar
Upend and Ballast Spar [hours]
Required: False. Automatically set to 36 if not assigned explicitly or loaded from defaults.
- Type:
float
- vesselPosJack
Vessel Positioning Time Jacket Installation [hours]
Required: False. Automatically set to 8 if not assigned explicitly or loaded from defaults.
- Type:
float
- vesselPosMono
Vessel Positioning Time Monopile Installation [hours]
Required: False. Automatically set to 3 if not assigned explicitly or loaded from defaults.
- Type:
float
- vesselPosTurb
Vessel Positioning Time Turbine Installation [hours]
Required: False. Automatically set to 2 if not assigned explicitly or loaded from defaults.
- Type:
float
- waterD
Max Water Depth [m]
Constraints: MIN=3,MAX=1000
Required: False. Automatically set to 30 if not assigned explicitly or loaded from defaults.
- Type:
float
- wharfRate
Wharf Loading and Unloading Cost Rate [$/tonne]
Required: False. Automatically set to 2.75 if not assigned explicitly or loaded from defaults.
- Type:
float
- winchDR
Cable Landfall Winch Day Rate [$/day]
Required: False. Automatically set to 1000 if not assigned explicitly or loaded from defaults.
- Type:
float
- workSpace
Offshore Substation Workspace & Accommodations Cost [$]
Required: False. Automatically set to 2000000 if not assigned explicitly or loaded from defaults.
- Type:
float
Outputs Group
- class PySAM.WindObos.WindObos.Outputs
- assign(dict) None
Assign attributes from dictionary, overwriting but not removing values.
Outputs_vals = { var: val, ...}
- export() dict
Export attributes into dictionary.
- replace(dict) None
Replace attributes from dictionary, unassigning values not present in input
dict
.Outputs_vals = { var: val, ...}
- arrCab1Cost
Array Cable #1 and Ancillary Cost [$]
- Type:
float
- arrCab2Cost
Array Cable #2 and Ancillary Cost [$]
- Type:
float
- arrInstTime
Array Cable System Installation Time [days]
- Type:
float
- array_cable_install_cost
Array Cable Installation Cost [$]
- Type:
float
- bos_capex
BOS Capital Expenditures [$]
- Type:
float
- cab1Leng
Array Cable #1 Length [m]
- Type:
float
- cab2Leng
Array Cabel #2 Length [m]
- Type:
float
- cabSurvey
Cable Route Survey Cost [$]
- Type:
float
- commissioning
Plant Commissioning Cost [$]
- Type:
float
- construction_finance_cost
Construction Finance Cost [$]
- Type:
float
- construction_finance_factor
Construction Finance Factor
- Type:
float
- construction_insurance_cost
Construction Insurance Cost [$]
- Type:
float
- decomCost
Plant Decommissioning Cost [$]
- Type:
float
- electrical_install_cost
Electrical Install Cost [$]
- Type:
float
- expCabCost
Export Cable and Ancillary Cost [$]
- Type:
float
- expCabLeng
Export Cable Length [m]
- Type:
float
- expInstTime
Export Cable Installation Time [days]
- Type:
float
- export_cable_install_cost
Export Cable Installation Cost [$]
- Type:
float
- fixCabLeng
Fixed Cable Length [m]
- Type:
float
- floatPrepTime
Floating Preparation Time [days]
- Type:
float
- freeCabLeng
Free Hanging Cable Length [m]
- Type:
float
- mob_demob_cost
Mobilization/Demobilization Cost [$]
- Type:
float
- moorTime
Mooring and Anchor System Installation Time [days]
- Type:
float
- nExpCab
Number of Export Cables
- Type:
float
- nSubPerTrip
Maximum Number of Substructures per Vessel Trip
- Type:
float
- nTurbPerTrip
Maximum Number of Turbines per Vessel Trip
- Type:
float
- soft_costs
Soft Costs [$]
- Type:
float
- subDeckArea
Deck Area Required per Substructure [m^2]
- Type:
float
- subInstTime
Substructure Installation Time [days]
- Type:
float
- subsInstTime
Offshore Substation Installation Time [days]
- Type:
float
- subsPileM
Offshore Substation Jacket Piles Mass [tonne]
- Type:
float
- subsSubM
Offshore Substation Substructure Mass [tonne]
- Type:
float
- subsTopM
Substation Topside Mass [tonne]
- Type:
float
- substation_install_cost
Substation Installation Cost [$]
- Type:
float
- substructure_install_cost
Substructure Install Cost [$]
- Type:
float
- systAngle
Floating System Angle [degrees]
- Type:
float
- totAnICost
Total Assembly & Installation Cost [$]
- Type:
float
- totDevCost
Total Development Cost [$]
- Type:
float
- totElecCost
Total Electrical Infrastructure Cost [$]
- Type:
float
- totEnMCost
Total Engineering & Management Cost [$]
- Type:
float
- totInstTime
Total Installation Time [days]
- Type:
float
- totPnSCost
Total Port & Staging Cost [$]
- Type:
float
- total_bos_cost
Total Balance of System Cost [$]
- Type:
float
- total_contingency_cost
Total Contingency Cost [$]
- Type:
float
- turbDeckArea
Deck Area Required per Turbine [m^2]
- Type:
float
- turbInstTime
Turbine Installation Time [days]
- Type:
float
- turbine_install_cost
Turbine Install Cost [$]
- Type:
float