TroughPhysicalIph

TroughPhysicalIph

PySAM.TroughPhysicalIph.default(config) TroughPhysicalIph

Load defaults for the configuration config. Available configurations are:

  • “PhysicalTroughIPHLCOHCalculator”

  • “PhysicalTroughIPHNone”

Note

Some inputs do not have default values and may be assigned a value from the variable’s Required attribute. See variable attribute descriptions below.

PySAM.TroughPhysicalIph.from_existing(data, optional config) TroughPhysicalIph

Share data with an existing PySAM class. If optional config is a valid configuration name, load the module’s defaults for that configuration.

PySAM.TroughPhysicalIph.new() TroughPhysicalIph
PySAM.TroughPhysicalIph.wrap(ssc_data_t) TroughPhysicalIph

Load data from a PySSC object.

Warning

Do not call PySSC.data_free on the ssc_data_t provided to wrap()

TroughPhysicalIph is a wrapper for the SSC compute module cmod_trough_physical_iph.cpp

Interdependent Variables

The variables listed below are interdependent with other variables. If you change the value of one of these variables, you may need to change values of other variables. The SAM user interface manages these interdependent variables, but in PySAM, it is up to you change the value of all interdependent variables so they are consistent. See Interdependent Variables for examples and details.

  • None

Functions

class PySAM.TroughPhysicalIph.TroughPhysicalIph

This class contains all the variable information for running a simulation. Variables are grouped together in the subclasses as properties. If property assignments are the wrong type, an error is thrown.

assign(dict) None

Assign attributes from nested dictionary, except for Outputs

nested_dict = { 'System Control': { var: val, ...}, ...}

execute(int verbosity) None

Execute simulation with verbosity level 0 (default) or 1

export() dict

Export attributes into nested dictionary

get_data_ptr() Pointer

Get ssc_data_t pointer

replace(dict) None

Replace attributes from nested dictionary, except for Outputs. Unassigns all values in each Group then assigns from the input dict.

nested_dict = { 'System Control': { var: val, ...}, ...}

unassign(name) None

Unassign a value in any of the variable groups.

value(name, optional value) None | float | dict | sequence | str

Get or set by name a value in any of the variable groups.

SystemControl Group

class PySAM.TroughPhysicalIph.TroughPhysicalIph.SystemControl
assign(dict) None

Assign attributes from dictionary, overwriting but not removing values.

SystemControl_vals = { var: val, ...}

export() dict

Export attributes into dictionary.

replace(dict) None

Replace attributes from dictionary, unassigning values not present in input dict.

SystemControl_vals = { var: val, ...}

disp_csu_cost

Cycle startup cost [$]

Type:

float

disp_rsu_cost

Receiver startup cost [$]

Type:

float

sim_type

timeseries, 2: design only

Required: False. Automatically set to 1 if not assigned explicitly or loaded from defaults.

Type:

float

Type:

1 (default)

Weather Group

class PySAM.TroughPhysicalIph.TroughPhysicalIph.Weather
assign(dict) None

Assign attributes from dictionary, overwriting but not removing values.

Weather_vals = { var: val, ...}

export() dict

Export attributes into dictionary.

replace(dict) None

Replace attributes from dictionary, unassigning values not present in input dict.

Weather_vals = { var: val, ...}

file_name

Local weather file with path [none]

Constraints: LOCAL_FILE

Required: False for configuration with default inputs. May be required if a variable dependent on its value changes. Example: For the Detailed PV - Single Owner configuration, only Subarray 1 is enabled in the configuration defaults, so Subarray 2 inputs would not be required; if Subarray 2 is enabled, then Subarray 2 inputs is required.

Type:

str

solar_resource_data

Weather resource data in memory

Required: False for configuration with default inputs. May be required if a variable dependent on its value changes. Example: For the Detailed PV - Single Owner configuration, only Subarray 1 is enabled in the configuration defaults, so Subarray 2 inputs would not be required; if Subarray 2 is enabled, then Subarray 2 inputs is required.

Type:

dict

SystemDesign Group

class PySAM.TroughPhysicalIph.TroughPhysicalIph.SystemDesign
assign(dict) None

Assign attributes from dictionary, overwriting but not removing values.

SystemDesign_vals = { var: val, ...}

export() dict

Export attributes into dictionary.

replace(dict) None

Replace attributes from dictionary, unassigning values not present in input dict.

SystemDesign_vals = { var: val, ...}

q_pb_design

Design heat input to power block [MWt]

Required: True

Type:

float

SolarField Group

class PySAM.TroughPhysicalIph.TroughPhysicalIph.SolarField
assign(dict) None

Assign attributes from dictionary, overwriting but not removing values.

SolarField_vals = { var: val, ...}

export() dict

Export attributes into dictionary.

replace(dict) None

Replace attributes from dictionary, unassigning values not present in input dict.

SolarField_vals = { var: val, ...}

A_aperture

Reflective aperture area of the collector [m2]

Required: True

Type:

sequence

AbsorberMaterial

Absorber material type [none]

Required: True

Type:

sequence[sequence]

AnnulusGas

Annulus gas type (1=air, 26=Ar, 27=H2) [none]

Required: True

Type:

sequence[sequence]

Ave_Focal_Length

Average focal length of the collector [m]

Required: True

Type:

sequence

ColperSCA

Number of individual collector sections in an SCA [none]

Required: True

Type:

sequence

D_2

Inner absorber tube diameter [m]

Required: True

Type:

sequence[sequence]

D_3

Outer absorber tube diameter [m]

Required: True

Type:

sequence[sequence]

D_4

Inner glass envelope diameter [m]

Required: True

Type:

sequence[sequence]

D_5

Outer glass envelope diameter [m]

Required: True

Type:

sequence[sequence]

D_p

Diameter of the absorber flow plug (optional) [m]

Required: True

Type:

sequence[sequence]

Design_loss

Receiver heat loss at design [W/m]

Required: True

Type:

sequence[sequence]

Dirt_HCE

Loss due to dirt on the receiver envelope [none]

Required: True

Type:

sequence[sequence]

Dirt_mirror

User-defined dirt on mirror derate [none]

Required: True

Type:

sequence

Distance_SCA

Piping distance between SCA’s in the field [m]

Required: True

Type:

sequence

EPSILON_4

Inner glass envelope emissivities (Pyrex) [none]

Required: True

Type:

sequence[sequence]

EPSILON_5

Outer glass envelope emissivities (Pyrex) [none]

Required: True

Type:

sequence[sequence]

Error

User-defined general optical error derate [none]

Required: True

Type:

sequence

FieldConfig

Number of subfield headers [none]

Required: True

Type:

float

Flow_type

Flow type through the absorber [none]

Required: True

Type:

sequence[sequence]

Fluid

Field HTF fluid ID number [none]

Required: True

Type:

float

GeomEffects

User-defined geometry effects derate [none]

Required: True

Type:

sequence

GlazingIntactIn

Glazing intact (broken glass) flag {1=true, else=false} [none]

Required: True

Type:

sequence[sequence]

HCE_FieldFrac

Fraction of the field occupied by this HCE type [none]

Required: True

Type:

sequence[sequence]

HDR_rough

Header pipe roughness [m]

Required: True

Type:

float

IAM_matrix

IAM coefficients, matrix for 4 collectors [none]

Required: True

Type:

sequence[sequence]

I_bn_des

Solar irradiation at design [C]

Required: True

Type:

float

L_SCA

Length of the SCA [m]

Required: True

Type:

sequence

L_aperture

Length of a single mirror/HCE unit [m]

Required: True

Type:

sequence

L_rnr_per_xpan

Threshold length of straight runner pipe without an expansion loop [m]

Required: True

Type:

float

L_xpan_hdr

Compined perpendicular lengths of each header expansion loop [m]

Required: True

Type:

float

L_xpan_rnr

Compined perpendicular lengths of each runner expansion loop [m]

Required: True

Type:

float

Min_rnr_xpans

Minimum number of expansion loops per single-diameter runner section [none]

Required: True

Type:

float

N_hdr_per_xpan

Number of collector loops per expansion loop [none]

Required: True

Type:

float

N_max_hdr_diams

Maximum number of diameters in each of the hot and cold headers [none]

Required: True

Type:

float

P_a

Annulus gas pressure [torr]

Required: True

Type:

sequence[sequence]

Pipe_hl_coef

Loss coefficient from the header, runner pipe, and non-HCE piping [m/s]

Required: True

Type:

float

Rho_mirror_clean

User-defined clean mirror reflectivity [none]

Required: True

Type:

sequence

Rough

Relative roughness of the internal HCE surface [-]

Required: True

Type:

sequence[sequence]

Row_Distance

Spacing between rows (centerline to centerline) [m]

Required: True

Type:

float

SCA_drives_elec

Tracking power, in Watts per SCA drive [W/m2-K]

Required: True

Type:

float

Shadowing

Receiver bellows shadowing loss factor [none]

Required: True

Type:

sequence[sequence]

T_fp

Freeze protection temperature (heat trace activation temperature) [none]

Required: True

Type:

float

T_loop_in_des

Design loop inlet temperature [C]

Required: True

Type:

float

T_loop_out

Target loop outlet temperature [C]

Required: True

Type:

float

Tau_envelope

Envelope transmittance [none]

Required: True

Type:

sequence[sequence]

TrackingError

User-defined tracking error derate [none]

Required: True

Type:

sequence

V_hdr_cold_max

Maximum HTF velocity in the cold headers at design [m/s]

Required: True

Type:

float

V_hdr_cold_min

Minimum HTF velocity in the cold headers at design [m/s]

Required: True

Type:

float

V_hdr_hot_max

Maximum HTF velocity in the hot headers at design [m/s]

Required: True

Type:

float

V_hdr_hot_min

Minimum HTF velocity in the hot headers at design [m/s]

Required: True

Type:

float

W_aperture

The collector aperture width (Total structural area used for shadowing) [m]

Required: True

Type:

sequence

accept_init

In acceptance testing mode - require steady-state startup [none]

Required: True

Type:

float

accept_loc

In acceptance testing mode - temperature sensor location [1/2]

Info: hx/loop

Required: True

Type:

float

accept_mode

Acceptance testing mode? [0/1]

Info: no/yes

Required: True

Type:

float

alpha_abs

Absorber absorptance [none]

Required: True

Type:

sequence[sequence]

alpha_env

Envelope absorptance [none]

Required: True

Type:

sequence[sequence]

azimuth

Azimuth angle of surface/axis [none]

Required: True

Type:

float

calc_design_pipe_vals

Calculate temps and pressures at design conditions for runners and headers [none]

Required: True

Type:

float

custom_sf_pipe_sizes

Use custom solar field pipe diams, wallthks, and lengths [none]

Required: True

Type:

float

epsilon_3_11

Absorber emittance for receiver type 1 variation 1 [none]

Required: True

Type:

sequence[sequence]

epsilon_3_12

Absorber emittance for receiver type 1 variation 2 [none]

Required: True

Type:

sequence[sequence]

epsilon_3_13

Absorber emittance for receiver type 1 variation 3 [none]

Required: True

Type:

sequence[sequence]

epsilon_3_14

Absorber emittance for receiver type 1 variation 4 [none]

Required: True

Type:

sequence[sequence]

epsilon_3_21

Absorber emittance for receiver type 2 variation 1 [none]

Required: True

Type:

sequence[sequence]

epsilon_3_22

Absorber emittance for receiver type 2 variation 2 [none]

Required: True

Type:

sequence[sequence]

epsilon_3_23

Absorber emittance for receiver type 2 variation 3 [none]

Required: True

Type:

sequence[sequence]

epsilon_3_24

Absorber emittance for receiver type 2 variation 4 [none]

Required: True

Type:

sequence[sequence]

epsilon_3_31

Absorber emittance for receiver type 3 variation 1 [none]

Required: True

Type:

sequence[sequence]

epsilon_3_32

Absorber emittance for receiver type 3 variation 2 [none]

Required: True

Type:

sequence[sequence]

epsilon_3_33

Absorber emittance for receiver type 3 variation 3 [none]

Required: True

Type:

sequence[sequence]

epsilon_3_34

Absorber emittance for receiver type 3 variation 4 [none]

Required: True

Type:

sequence[sequence]

epsilon_3_41

Absorber emittance for receiver type 4 variation 1 [none]

Required: True

Type:

sequence[sequence]

epsilon_3_42

Absorber emittance for receiver type 4 variation 2 [none]

Required: True

Type:

sequence[sequence]

epsilon_3_43

Absorber emittance for receiver type 4 variation 3 [none]

Required: True

Type:

sequence[sequence]

epsilon_3_44

Absorber emittance for receiver type 4 variation 4 [none]

Required: True

Type:

sequence[sequence]

eta_pump

HTF pump efficiency [none]

Required: True

Type:

float

field_fl_props

User defined field fluid property data [-]

Required: True

Type:

sequence[sequence]

m_dot_htfmax

Maximum loop HTF flow rate [kg/s]

Required: True

Type:

float

m_dot_htfmin

Minimum loop HTF flow rate [kg/s]

Required: True

Type:

float

mc_bal_cold

Heat capacity of the balance of plant on the cold side [kWht/K-MWt]

Required: True

Type:

float

mc_bal_hot

Heat capacity of the balance of plant on the hot side [kWht/K-MWt]

Info: none

Required: True

Type:

float

mc_bal_sca

Non-HTF heat capacity associated with each SCA - per meter basis [Wht/K-m]

Required: True

Type:

float

nColt

Number of collector types [none]

Options: constant=4

Required: True

Type:

float

nHCEVar

Number of HCE variants per type [none]

Required: True

Type:

float

nHCEt

Number of HCE types [none]

Required: True

Type:

float

northsouth_field_sep

North/south separation between subfields. 0 = SCAs are touching [m]

Required: True

Type:

float

offset_xpan_hdr

Location of first header expansion loop. 1 = after first collector loop [none]

Required: True

Type:

float

p_start

Collector startup energy, per SCA [kWe-hr]

Required: True

Type:

float

rec_qf_delay

Energy-based receiver startup delay (fraction of rated thermal power) [-]

Required: True

Type:

float

rec_su_delay

Fixed startup delay time for the receiver [hr]

Required: True

Type:

float

sf_hdr_diams

Custom header diameters [m]

Required: True

Type:

sequence[sequence]

sf_hdr_lengths

Custom header lengths [m]

Required: True

Type:

sequence[sequence]

sf_hdr_wallthicks

Custom header wall thicknesses [m]

Required: True

Type:

sequence[sequence]

sf_rnr_diams

Custom runner diameters [m]

Required: True

Type:

sequence[sequence]

sf_rnr_lengths

Custom runner lengths [m]

Required: True

Type:

sequence[sequence]

sf_rnr_wallthicks

Custom runner wall thicknesses [m]

Required: True

Type:

sequence[sequence]

theta_dep

Deploy angle [deg]

Required: True

Type:

float

theta_stow

Stow angle [deg]

Required: True

Type:

float

tilt

Tilt angle of surface/axis [none]

Required: True

Type:

float

wind_stow_speed

Trough wind stow speed [m/s]

Required: False. Automatically set to 50 if not assigned explicitly or loaded from defaults.

Type:

float

HeatSink Group

class PySAM.TroughPhysicalIph.TroughPhysicalIph.HeatSink
assign(dict) None

Assign attributes from dictionary, overwriting but not removing values.

HeatSink_vals = { var: val, ...}

export() dict

Export attributes into dictionary.

replace(dict) None

Replace attributes from dictionary, unassigning values not present in input dict.

HeatSink_vals = { var: val, ...}

pb_pump_coef

Pumping power to move 1kg of HTF through PB loop [kW/kg]

Required: True

Type:

float

TES Group

class PySAM.TroughPhysicalIph.TroughPhysicalIph.TES
assign(dict) None

Assign attributes from dictionary, overwriting but not removing values.

TES_vals = { var: val, ...}

export() dict

Export attributes into dictionary.

replace(dict) None

Replace attributes from dictionary, unassigning values not present in input dict.

TES_vals = { var: val, ...}

cold_tank_Thtr

Minimum allowable cold tank HTF temp [C]

Required: True

Type:

float

cold_tank_max_heat

Rated heater capacity for cold tank heating [MWe]

Required: True

Type:

float

dt_hot

Hot side HX approach temp [C]

Required: True

Type:

float

h_tank

Total height of tank (height of HTF when tank is full [m]

Required: True

Type:

float

h_tank_min

Minimum allowable HTF height in storage tank [m]

Required: True

Type:

float

hot_tank_Thtr

Minimum allowable hot tank HTF temp [C]

Required: True

Type:

float

hot_tank_max_heat

Rated heater capacity for hot tank heating [MWe]

Required: True

Type:

float

init_hot_htf_percent

Initial fraction of avail. vol that is hot [%]

Required: True

Type:

float

store_fl_props

User defined storage fluid property data [-]

Required: True

Type:

sequence[sequence]

store_fluid

Material number for storage fluid [-]

Required: True

Type:

float

tank_pairs

Number of equivalent tank pairs [-]

Constraints: INTEGER

Required: True

Type:

float

tshours

Equivalent full-load thermal storage hours [hr]

Required: True

Type:

float

u_tank

Loss coefficient from the tank [W/m2-K]

Required: True

Type:

float

Tou Group

class PySAM.TroughPhysicalIph.TroughPhysicalIph.Tou
assign(dict) None

Assign attributes from dictionary, overwriting but not removing values.

Tou_vals = { var: val, ...}

export() dict

Export attributes into dictionary.

replace(dict) None

Replace attributes from dictionary, unassigning values not present in input dict.

Tou_vals = { var: val, ...}

ampl_data_dir

AMPL data file directory [-]

Required: False. Automatically set to ‘’ if not assigned explicitly or loaded from defaults.

Type:

str

ampl_exec_call

System command to run AMPL code [-]

Required: False. Automatically set to ‘ampl sdk_solution.run’ if not assigned explicitly or loaded from defaults.

Type:

str

can_cycle_use_standby

Can the cycle use standby operation?

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:

float

disp_pen_delta_w

Dispatch cycle production change penalty [$/kWe-change]

Type:

float

dispatch_factors_ts

Dispatch payment factor array

Required: Required if ppa_multiplier_model=1&csp_financial_model<5&is_dispatch=1

Type:

sequence

dispatch_sched_weekday

12x24 PPA pricing Weekday schedule

Required: Required if ppa_multiplier_model=0&csp_financial_model<5&is_dispatch=1

Type:

sequence[sequence]

dispatch_sched_weekend

12x24 PPA pricing Weekend schedule

Required: Required if ppa_multiplier_model=0&csp_financial_model<5&is_dispatch=1

Type:

sequence[sequence]

dispatch_series

Time series dispatch factors

Type:

sequence

f_turb_tou_periods

Dispatch logic for turbine load fraction [-]

Required: True

Type:

sequence

is_ampl_engine

Run dispatch optimization with external AMPL engine [-]

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:

float

is_dispatch_series

Use time-series dispatch factors

Required: False. Automatically set to 1 if not assigned explicitly or loaded from defaults.

Type:

float

is_timestep_load_fractions

Use turbine load fraction for each timestep instead of block dispatch?

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:

float

is_tod_pc_target_also_pc_max

Is the TOD target cycle heat input also the max cycle heat input?

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:

float

is_write_ampl_dat

Write AMPL data files for dispatch run [-]

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:

float

ppa_multiplier_model

dispatch factors dispatch_factorX, 1: hourly multipliers dispatch_factors_ts [0/1]

Options: 0=diurnal,1=timestep

Constraints: INTEGER,MIN=0

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:

float

Type:

PPA multiplier model 0

q_rec_heattrace

Receiver heat trace energy consumption during startup [kWe-hr]

Required: False. Automatically set to 0.0 if not assigned explicitly or loaded from defaults.

Type:

float

q_rec_standby

Receiver standby energy consumption [kWt]

Required: False. Automatically set to 9e99 if not assigned explicitly or loaded from defaults.

Type:

float

timestep_load_fractions

Turbine load fraction for each timestep, alternative to block dispatch

Required: False for configuration with default inputs. May be required if a variable dependent on its value changes. Example: For the Detailed PV - Single Owner configuration, only Subarray 1 is enabled in the configuration defaults, so Subarray 2 inputs would not be required; if Subarray 2 is enabled, then Subarray 2 inputs is required.

Type:

sequence

weekday_schedule

12x24 CSP operation Time-of-Use Weekday schedule [-]

Required: True

Type:

sequence[sequence]

weekend_schedule

12x24 CSP operation Time-of-Use Weekend schedule [-]

Required: True

Type:

sequence[sequence]

FinancialModel Group

class PySAM.TroughPhysicalIph.TroughPhysicalIph.FinancialModel
assign(dict) None

Assign attributes from dictionary, overwriting but not removing values.

FinancialModel_vals = { var: val, ...}

export() dict

Export attributes into dictionary.

replace(dict) None

Replace attributes from dictionary, unassigning values not present in input dict.

FinancialModel_vals = { var: val, ...}

csp_financial_model

[1-8]

Constraints: INTEGER,MIN=0

Required: False. Automatically set to 1 if not assigned explicitly or loaded from defaults.

Type:

float

FinancialSolutionMode Group

class PySAM.TroughPhysicalIph.TroughPhysicalIph.FinancialSolutionMode
assign(dict) None

Assign attributes from dictionary, overwriting but not removing values.

FinancialSolutionMode_vals = { var: val, ...}

export() dict

Export attributes into dictionary.

replace(dict) None

Replace attributes from dictionary, unassigning values not present in input dict.

FinancialSolutionMode_vals = { var: val, ...}

ppa_soln_mode

PPA solution mode (0=Specify IRR target, 1=Specify PPA price)

Required: Required if ppa_multiplier_model=0&csp_financial_model<5&is_dispatch=1

Type:

float

ElectricityRates Group

class PySAM.TroughPhysicalIph.TroughPhysicalIph.ElectricityRates
assign(dict) None

Assign attributes from dictionary, overwriting but not removing values.

ElectricityRates_vals = { var: val, ...}

export() dict

Export attributes into dictionary.

replace(dict) None

Replace attributes from dictionary, unassigning values not present in input dict.

ElectricityRates_vals = { var: val, ...}

en_electricity_rates

Enable electricity rates for grid purchase [0/1]

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:

float

TimeOfDeliveryFactors Group

class PySAM.TroughPhysicalIph.TroughPhysicalIph.TimeOfDeliveryFactors
assign(dict) None

Assign attributes from dictionary, overwriting but not removing values.

TimeOfDeliveryFactors_vals = { var: val, ...}

export() dict

Export attributes into dictionary.

replace(dict) None

Replace attributes from dictionary, unassigning values not present in input dict.

TimeOfDeliveryFactors_vals = { var: val, ...}

dispatch_tod_factors

TOD factors for periods 1 through 9

Info: We added this array input after SAM 2022.12.21 to replace the functionality of former single value inputs dispatch_factor1 through dispatch_factor9

Required: Required if ppa_multiplier_model=0&csp_financial_model<5&is_dispatch=1

Type:

sequence

Revenue Group

class PySAM.TroughPhysicalIph.TroughPhysicalIph.Revenue
assign(dict) None

Assign attributes from dictionary, overwriting but not removing values.

Revenue_vals = { var: val, ...}

export() dict

Export attributes into dictionary.

replace(dict) None

Replace attributes from dictionary, unassigning values not present in input dict.

Revenue_vals = { var: val, ...}

mp_energy_market_revenue

Energy market revenue input

Info: Lifetime x 2[Cleared Capacity(MW),Price($/MWh)]

Required: Required if csp_financial_model=6&is_dispatch=1

Type:

sequence[sequence]

ppa_price_input

PPA prices - yearly [$/kWh]

Required: Required if ppa_multiplier_model=0&csp_financial_model<5&is_dispatch=1

Type:

sequence

System Group

class PySAM.TroughPhysicalIph.TroughPhysicalIph.System
assign(dict) None

Assign attributes from dictionary, overwriting but not removing values.

System_vals = { var: val, ...}

export() dict

Export attributes into dictionary.

replace(dict) None

Replace attributes from dictionary, unassigning values not present in input dict.

System_vals = { var: val, ...}

aux_array

Auxiliary heater, mult frac and const, linear and quad coeff

Required: True

Type:

sequence

bop_array

Balance of plant parasitic power fraction, mult frac and const, linear and quad coeff

Required: True

Type:

sequence

pb_fixed_par

Fraction of rated gross power constantly consumed [MWe/MWcap]

Required: True

Type:

float

washing_frequency

Mirror washing frequency [-/year]

Required: True

Type:

float

water_usage_per_wash

Water usage per wash [L/m2_aper]

Required: True

Type:

float

Powerblock Group

class PySAM.TroughPhysicalIph.TroughPhysicalIph.Powerblock
assign(dict) None

Assign attributes from dictionary, overwriting but not removing values.

Powerblock_vals = { var: val, ...}

export() dict

Export attributes into dictionary.

replace(dict) None

Replace attributes from dictionary, unassigning values not present in input dict.

Powerblock_vals = { var: val, ...}

L_rnr_pb

Length of runner pipe in power block [m]

Required: True

Type:

float

P_boil

Boiler operating pressure [bar]

Type:

float

Controller Group

class PySAM.TroughPhysicalIph.TroughPhysicalIph.Controller
assign(dict) None

Assign attributes from dictionary, overwriting but not removing values.

Controller_vals = { var: val, ...}

export() dict

Export attributes into dictionary.

replace(dict) None

Replace attributes from dictionary, unassigning values not present in input dict.

Controller_vals = { var: val, ...}

T_tank_hot_inlet_min

Minimum hot tank htf inlet temperature [C]

Required: True

Type:

float

V_tes_des

Design-point velocity to size the TES pipe diameters [m/s]

Required: True

Type:

float

custom_tes_p_loss

TES pipe losses are based on custom lengths and coeffs [-]

Required: True

Type:

float

custom_tes_pipe_sizes

Use custom TES pipe diams, wallthks, and lengths [-]

Required: True

Type:

float

has_hot_tank_bypass

Bypass valve connects field outlet to cold tank [-]

Required: True

Type:

float

k_tes_loss_coeffs

Minor loss coeffs for the coll, gen, and bypass loops [-]

Required: True

Type:

sequence[sequence]

non_solar_field_land_area_multiplier

non_solar_field_land_area_multiplier [-]

Required: True

Type:

float

specified_solar_multiple

specified_solar_multiple [-]

Required: True

Type:

float

specified_total_aperture

specified_total_aperture [-]

Required: True

Type:

float

tanks_in_parallel

Tanks are in parallel, not in series, with solar field [-]

Required: True

Type:

float

tes_diams

Custom TES diameters [m]

Required: Required if custom_tes_pipe_sizes=1

Type:

sequence[sequence]

tes_lengths

Custom TES lengths [m]

Required: Required if custom_tes_pipe_sizes=1

Type:

sequence[sequence]

tes_pump_coef

Pumping power to move 1kg of HTF through tes loop [kW/(kg/s)]

Required: True

Type:

float

tes_wallthicks

Custom TES wall thicknesses [m]

Required: Required if custom_tes_pipe_sizes=1

Type:

sequence[sequence]

trough_loop_control

trough_loop_control [-]

Required: True

Type:

sequence

use_solar_mult_or_aperture_area

Use solar multiple or total field aperture area [-]

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:

float

TowerAndReceiver Group

class PySAM.TroughPhysicalIph.TroughPhysicalIph.TowerAndReceiver
assign(dict) None

Assign attributes from dictionary, overwriting but not removing values.

TowerAndReceiver_vals = { var: val, ...}

export() dict

Export attributes into dictionary.

replace(dict) None

Replace attributes from dictionary, unassigning values not present in input dict.

TowerAndReceiver_vals = { var: val, ...}

piping_loss

Thermal loss per meter of piping [Wt/m]

Type:

float

SolarResourceData Group

class PySAM.TroughPhysicalIph.TroughPhysicalIph.SolarResourceData
assign(dict) None

Assign attributes from dictionary, overwriting but not removing values.

SolarResourceData_vals = { var: val, ...}

export() dict

Export attributes into dictionary.

replace(dict) None

Replace attributes from dictionary, unassigning values not present in input dict.

SolarResourceData_vals = { var: val, ...}

lat

Latitude [degree]

Required: True

Type:

float

CapitalCosts Group

class PySAM.TroughPhysicalIph.TroughPhysicalIph.CapitalCosts
assign(dict) None

Assign attributes from dictionary, overwriting but not removing values.

CapitalCosts_vals = { var: val, ...}

export() dict

Export attributes into dictionary.

replace(dict) None

Replace attributes from dictionary, unassigning values not present in input dict.

CapitalCosts_vals = { var: val, ...}

csp_dtr_cost_bop_per_kwe

Balance of Plant Cost per kWe [$/kWe]

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:

float

csp_dtr_cost_contingency_percent

Contingency Percent [%]

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:

float

csp_dtr_cost_epc_fixed

Fixed EPC Cost [$]

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:

float

csp_dtr_cost_epc_per_acre

EPC Costs per acre [$/acre]

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:

float

csp_dtr_cost_epc_per_watt

EPC Cost Wac [$/Wac]

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:

float

csp_dtr_cost_epc_percent

EPC Costs % direct [%]

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:

float

csp_dtr_cost_heat_sink_cost_per_kwe

Heat Sink Cost per kWe [$/kWe]

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:

float

csp_dtr_cost_htf_system_cost_per_m2

HTF System Cost Per m2 [$/m2]

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:

float

csp_dtr_cost_plm_fixed

Fixed Land Cost [$]

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:

float

csp_dtr_cost_plm_per_acre

Land Cost per acre [$/acre]

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:

float

csp_dtr_cost_plm_per_watt

Land Cost Wac [$/Wac]

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:

float

csp_dtr_cost_plm_percent

Land Cost % direct [%]

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:

float

csp_dtr_cost_sales_tax_percent

Sales Tax Percentage of Direct Cost [%]

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:

float

csp_dtr_cost_site_improvements_cost_per_m2

Site Improvement Cost per m2 [$/m2]

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:

float

csp_dtr_cost_solar_field_cost_per_m2

Solar Field Cost per m2 [$/m2]

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:

float

csp_dtr_cost_storage_cost_per_kwht

Storage cost per kWht [$/kWht]

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:

float

sales_tax_rate

Sales Tax Rate [%]

Required: False. Automatically set to 0 if not assigned explicitly or loaded from defaults.

Type:

float

FinancialParameters Group

class PySAM.TroughPhysicalIph.TroughPhysicalIph.FinancialParameters
assign(dict) None

Assign attributes from dictionary, overwriting but not removing values.

FinancialParameters_vals = { var: val, ...}

export() dict

Export attributes into dictionary.

replace(dict) None

Replace attributes from dictionary, unassigning values not present in input dict.

FinancialParameters_vals = { var: val, ...}

const_per_interest_rate1

Interest rate, loan 1 [%]

Required: True

Type:

float

const_per_interest_rate2

Interest rate, loan 2 [%]

Required: True

Type:

float

const_per_interest_rate3

Interest rate, loan 3 [%]

Required: True

Type:

float

const_per_interest_rate4

Interest rate, loan 4 [%]

Required: True

Type:

float

const_per_interest_rate5

Interest rate, loan 5 [%]

Required: True

Type:

float

const_per_months1

Months prior to operation, loan 1

Required: True

Type:

float

const_per_months2

Months prior to operation, loan 2

Required: True

Type:

float

const_per_months3

Months prior to operation, loan 3

Required: True

Type:

float

const_per_months4

Months prior to operation, loan 4

Required: True

Type:

float

const_per_months5

Months prior to operation, loan 5

Required: True

Type:

float

const_per_percent1

Percent of total installed cost, loan 1 [%]

Required: True

Type:

float

const_per_percent2

Percent of total installed cost, loan 2 [%]

Required: True

Type:

float

const_per_percent3

Percent of total installed cost, loan 3 [%]

Required: True

Type:

float

const_per_percent4

Percent of total installed cost, loan 4 [%]

Required: True

Type:

float

const_per_percent5

Percent of total installed cost, loan 5 [%]

Required: True

Type:

float

const_per_upfront_rate1

Upfront fee on principal, loan 1 [%]

Required: True

Type:

float

const_per_upfront_rate2

Upfront fee on principal, loan 2 [%]

Required: True

Type:

float

const_per_upfront_rate3

Upfront fee on principal, loan 3 [%]

Required: True

Type:

float

const_per_upfront_rate4

Upfront fee on principal, loan 4 [%]

Required: True

Type:

float

const_per_upfront_rate5

Upfront fee on principal, loan 5 [%]

Required: True

Type:

float

AdjustmentFactors Group

class PySAM.AdjustmentFactors.AdjustmentFactors
assign() None

Assign attributes from dictionary

export() Dict

Export attributes into dictionary

constant

AC Constant loss adjustment [%]

dc_constant

DC Constant loss adjustment [%]

dc_en_hourly

Enable DC hourly-based adjustment factors [0/1]

dc_en_periods

Enable DC period-based adjustment factors [0/1]

dc_en_timeindex

Enable DC lfetime adjustment factors [0/1]

dc_hourly

DC Hourly Adjustment Factors [%]

dc_periods

DC Period-based Adjustment Factors [%]

dc_timeindex

DC Lifetime Adjustment Factors [%]

en_hourly

Enable AC hourly-based adjustment factors [0/1]

en_periods

Enable AC period-based adjustment factors [0/1]

en_timeindex

Enable AC lfetime adjustment factors [0/1]

hourly

AC Hourly Adjustment Factors [%]

periods

AC Period-based Adjustment Factors [%]

sf_constant

DC Constant loss adjustment [%]

sf_en_hourly

Enable SF hourly-based adjustment factors [0/1]

sf_en_periods

Enable SF period-based adjustment factors [0/1]

sf_en_timeindex

Enable SF lfetime adjustment factors [0/1]

sf_hourly

SF Hourly Adjustment Factors [%]

sf_periods

SF Period-based Adjustment Factors [%]

sf_timeindex

SF Lifetime Adjustment Factors [%]

timeindex

AC Lifetime Adjustment Factors [%]

Outputs Group

class PySAM.TroughPhysicalIph.TroughPhysicalIph.Outputs
assign(dict) None

Assign attributes from dictionary, overwriting but not removing values.

Outputs_vals = { var: val, ...}

export() dict

Export attributes into dictionary.

replace(dict) None

Replace attributes from dictionary, unassigning values not present in input dict.

Outputs_vals = { var: val, ...}

CosTh_ave

Field collector cosine efficiency

Type:

sequence

D_cpnt

Inner diameters of the components in each loop interconnect [m]

Type:

sequence[sequence]

EndLoss_ave

Field collector optical end loss

Type:

sequence

EqOpteff

Field optical efficiency before defocus

Type:

sequence

IAM_ave

Field collector incidence angle modifier

Type:

sequence

K_cpnt

Minor loss coefficients of the components in each loop interconnect

Type:

sequence[sequence]

L_cpnt

Lengths of the components in each loop interconnect [m]

Type:

sequence[sequence]

P_fixed

Parasitic power fixed load [MWe]

Type:

sequence

P_plant_balance_tot

Parasitic power generation-dependent load [MWe]

Type:

sequence

RowShadow_ave

Field collector row shadowing loss

Type:

sequence

SCADefocusArray

Order in which the SCA’s should be defocused

Type:

sequence

SCAInfoArray

Receiver (,1) and collector (,2) type for each assembly in loop

Type:

sequence[sequence]

SCAs_def

Field fraction of focused SCAs

Type:

sequence

T_field_cold_in

Field timestep-averaged inlet temperature [C]

Type:

sequence

T_field_hot_out

Field timestep-averaged outlet temperature [C]

Type:

sequence

T_heat_sink_in

Heat sink HTF inlet temp [C]

Type:

sequence

T_heat_sink_out

Heat sink HTF outlet temp [C]

Type:

sequence

T_rec_cold_in

Loop timestep-averaged inlet temperature [C]

Type:

sequence

T_rec_hot_out

Loop timestep-averaged outlet temperature [C]

Type:

sequence

T_tes_cold

TES cold temperature [C]

Type:

sequence

T_tes_hot

TES hot temperature [C]

Type:

sequence

Theta_ave

Field collector solar incidence angle [deg]

Type:

sequence

Type_cpnt

Type of component in each loop interconnect [0=fitting | 1=pipe | 2=flex_hose] [Wm]

Type:

sequence[sequence]

V_tank_hot_ini

Initial hot tank volume [m3]

Type:

float

W_dot_field_pump

Field htf pumping power [MWe]

Type:

sequence

W_dot_par_tot_haf

Adjusted parasitic power [kWe]

Type:

sequence

W_dot_parasitic_tot

System total electrical parasitic [MWe]

Type:

sequence

W_dot_pc_pump

Heat sink pumping power [MWe]

Type:

sequence

W_dot_sca_track

Field collector tracking power [MWe]

Type:

sequence

annual_electricity_consumption

Annual electricity consumption w/ avail derate [kWe-hr]

Type:

float

annual_energy

Annual Net Electrical Energy Production w/ avail derate [kWe-hr]

Type:

float

annual_energy_distribution_time

Annual energy production as function of time [kW]

Type:

sequence[sequence]

annual_field_freeze_protection

Annual thermal power for field freeze protection [kWt-hr]

Type:

float

annual_tes_freeze_protection

Annual thermal power for TES freeze protection [kWt-hr]

Type:

float

annual_thermal_consumption

Annual thermal freeze protection required [kWt-hr]

Type:

float

annual_total_water_use

Total Annual Water Usage [m^3]

Type:

float

aux_design

Aux parasitics at design [MWe]

Type:

float

avg_suboptimal_rel_mip_gap

Average suboptimal relative MIP gap [%]

Type:

float

beam

Resource Beam normal irradiance [W/m2]

Type:

sequence

bop_design

BOP parasitics at design [MWe]

Type:

float

capacity_factor

Capacity factor [%]

Type:

float

const_per_interest1

Interest cost, loan 1 [$]

Type:

float

const_per_interest2

Interest cost, loan 2 [$]

Type:

float

const_per_interest3

Interest cost, loan 3 [$]

Type:

float

const_per_interest4

Interest cost, loan 4 [$]

Type:

float

const_per_interest5

Interest cost, loan 5 [$]

Type:

float

const_per_interest_total

Total interest costs, all loans [$]

Type:

float

const_per_percent_total

Total percent of installed costs, all loans [%]

Type:

float

const_per_principal1

Principal, loan 1 [$]

Type:

float

const_per_principal2

Principal, loan 2 [$]

Type:

float

const_per_principal3

Principal, loan 3 [$]

Type:

float

const_per_principal4

Principal, loan 4 [$]

Type:

float

const_per_principal5

Principal, loan 5 [$]

Type:

float

const_per_principal_total

Total principal, all loans [$]

Type:

float

const_per_total1

Total financing cost, loan 1 [$]

Type:

float

const_per_total2

Total financing cost, loan 2 [$]

Type:

float

const_per_total3

Total financing cost, loan 3 [$]

Type:

float

const_per_total4

Total financing cost, loan 4 [$]

Type:

float

const_per_total5

Total financing cost, loan 5 [$]

Type:

float

construction_financing_cost

Total construction financing cost [$]

Type:

float

cp_battery_nameplate

Battery nameplate [MWt]

Type:

float

cp_system_nameplate

System capacity for capacity payments [MWt]

Type:

float

csp_dtr_cost_bop

Balance of plant cost [$]

Type:

float

csp_dtr_cost_contingency

Contingency cost [$]

Type:

float

csp_dtr_cost_epc_total

EPC total cost [$]

Type:

float

csp_dtr_cost_heat_sink

Heat sink cost [$]

Type:

float

csp_dtr_cost_htf_system

HTF system cost [$]

Type:

float

csp_dtr_cost_installed_per_capacity

Estimated total installed cost per net capacity ($/kW) [$/kW]

Type:

float

csp_dtr_cost_plm_total

Total land cost [$]

Type:

float

csp_dtr_cost_sales_tax_total

Sales tax total [$]

Type:

float

csp_dtr_cost_site_improvements

Site improvements cost [$]

Type:

float

csp_dtr_cost_solar_field

Solar field cost [$]

Type:

float

csp_dtr_cost_storage

Thermal storage cost [$]

Type:

float

csp_dtr_hce_design_heat_losses

Heat loss at design [W/m]

Type:

sequence

csp_dtr_hce_optical_effs

HCE optical efficiencies at design

Type:

sequence

csp_dtr_loop_hce_heat_loss

Loop Heat Loss from HCE at Design [W/m]

Type:

float

csp_dtr_sca_ap_lengths

Length of single module [m]

Type:

sequence[sequence]

csp_dtr_sca_calc_costh

Calculated costheta

Type:

float

csp_dtr_sca_calc_end_gains

End gain factor

Type:

sequence[sequence]

csp_dtr_sca_calc_end_losses

Use time-series net electricity generation limits

Type:

sequence[sequence]

csp_dtr_sca_calc_iams

IAM at summer solstice

Type:

sequence[sequence]

csp_dtr_sca_calc_latitude

Latitude [degree]

Type:

float

csp_dtr_sca_calc_sca_effs

SCA optical efficiencies at design

Type:

sequence

csp_dtr_sca_calc_theta

Calculated theta [degree]

Type:

float

csp_dtr_sca_calc_zenith

Calculated zenith [degree]

Type:

float

csp_pt_tes_htf_density

Storage htf density [kg/m3]

Type:

float

csp_pt_tes_tank_diameter

Tank diameter [m]

Type:

float

defocus

Field optical focus fraction

Type:

sequence

deltaP_field

Field pressure drop [bar]

Type:

sequence

direct_subtotal

Direct subtotal [$]

Type:

float

dni_costh

Field collector DNI-cosine product [W/m2]

Type:

sequence

e_ch_tes

TES charge state [MWht]

Type:

sequence

e_dot_field_int_energy

Field change in material/htf internal energy [MWt]

Type:

sequence

field_htf_cp_avg_des

Field average htf cp at design [kJ/kgK]

Type:

float

field_htf_max_temp

Maximum field htf temp [C]

Type:

float

field_htf_min_temp

Minimum field htf temp [C]

Type:

float

field_thermal_output_actual

Design-point thermal power from the solar field limited by mass flow [MW]

Type:

float

field_thermal_output_ideal

Design-point thermal power from the solar field with no limit [MW]

Type:

float

fixed_land_area

Fixed Land Area [acre]

Type:

float

gen

Total thermal power to grid w/ avail. derate [kWe]

Type:

sequence

hour_day

Resource Hour of Day

Type:

sequence

is_hx

System has heat exchanger no/yes (0/1)

Type:

float

is_pc_sb_allowed

is power cycle standby allowed

Type:

sequence

is_pc_su_allowed

is power cycle startup allowed

Type:

sequence

is_rec_su_allowed

is receiver startup allowed

Type:

sequence

kwh_per_kw

First year kWh/kW [kWh/kW]

Type:

float

loop_optical_efficiency

Loop total optical effiency at design

Type:

float

m_dot_balance

Relative mass flow balance error

Type:

sequence

m_dot_cold_tank_to_hot_tank

cold tank to hot tank [kg/s]

Type:

sequence

Type:

Mass flow

m_dot_cr_to_tes_hot

field to hot TES [kg/s]

Type:

sequence

Type:

Mass flow

m_dot_cycle_to_field

cycle to field [kg/s]

Type:

sequence

Type:

Mass flow

m_dot_field_delivered

Field total mass flow delivered [kg/s]

Type:

sequence

m_dot_field_recirc

Field total mass flow recirculated [kg/s]

Type:

sequence

m_dot_field_to_cycle

field to cycle [kg/s]

Type:

sequence

Type:

Mass flow

m_dot_htf_heat_sink

Heat sink HTF mass flow [kg/s]

Type:

sequence

m_dot_loop

Receiver mass flow rate [kg/s]

Type:

sequence

m_dot_pc_to_tes_cold

cycle to cold TES [kg/s]

Type:

sequence

Type:

Mass flow

m_dot_tes_cold_out

TES cold out [kg/s]

Type:

sequence

Type:

Mass flow

m_dot_tes_hot_out

TES hot out [kg/s]

Type:

sequence

Type:

Mass flow

mass_tes_cold

TES cold tank mass (end) [kg]

Type:

sequence

mass_tes_hot

TES hot tank mass (end) [kg]

Type:

sequence

max_field_flow_velocity

Maximum field flow velocity [m/s]

Type:

float

min_field_flow_velocity

Minimum field flow velocity [m/s]

Type:

float

min_inner_diameter

Minimum absorber inner diameter in loop [m]

Type:

float

month

Resource Month

Type:

sequence

monthly_energy

Monthly Energy Gross [kWh]

Type:

sequence

nLoops

Number of loops in the field

Type:

float

nSCA

Number of SCAs in a loop [none]

Type:

float

n_op_modes

Operating modes in reporting timestep

Type:

sequence

nameplate

Nameplate capacity [MWe]

Type:

float

op_mode_1

1st operating mode

Type:

sequence

op_mode_2

2nd op. mode, if applicable

Type:

sequence

op_mode_3

3rd op. mode, if applicable

Type:

sequence

operating_modes_a

First 3 operating modes tried

Type:

sequence

operating_modes_b

Next 3 operating modes tried

Type:

sequence

operating_modes_c

Final 3 operating modes tried

Type:

sequence

pipe_header_P_dsn

Field piping header pressure at design [bar]

Type:

sequence

pipe_header_T_dsn

Field piping header temperature at design [C]

Type:

sequence

pipe_header_diams

Field piping header diameters [m]

Type:

sequence

pipe_header_expansions

Number of field piping header expansions [-]

Type:

sequence

pipe_header_lengths

Field piping header lengths [m]

Type:

sequence

pipe_header_mdot_dsn

Field piping header mass flow at design [kg/s]

Type:

sequence

pipe_header_vel_dsn

Field piping header velocity at design [m/s]

Type:

sequence

pipe_header_wallthk

Field piping header wall thicknesses [m]

Type:

sequence

pipe_loop_P_dsn

Field piping loop pressure at design [bar]

Type:

sequence

pipe_loop_T_dsn

Field piping loop temperature at design [C]

Type:

sequence

pipe_runner_P_dsn

Field piping runner pressure at design [bar]

Type:

sequence

pipe_runner_T_dsn

Field piping runner temperature at design [C]

Type:

sequence

pipe_runner_diams

Field piping runner diameters [m]

Type:

sequence

pipe_runner_expansions

Number of field piping runner expansions [-]

Type:

sequence

pipe_runner_lengths

Field piping runner lengths [m]

Type:

sequence

pipe_runner_mdot_dsn

Field piping runner mass flow at design [kg/s]

Type:

sequence

pipe_runner_vel_dsn

Field piping runner velocity at design [m/s]

Type:

sequence

pipe_runner_wallthk

Field piping runner wall thicknesses [m]

Type:

sequence

pipe_tes_P_dsn

Pressure in TES pipes at design conditions [bar]

Type:

sequence

pipe_tes_T_dsn

Temperature in TES pipes at design conditions [C]

Type:

sequence

pipe_tes_diams

Pipe diameters in TES [m]

Type:

sequence

pipe_tes_lengths

Pipe lengths in TES [m]

Type:

sequence

pipe_tes_mdot_dsn

Mass flow TES pipes at design conditions [kg/s]

Type:

sequence

pipe_tes_vel_dsn

Velocity in TES pipes at design conditions [m/s]

Type:

sequence

pipe_tes_wallthk

Pipe wall thickness in TES [m]

Type:

sequence

pres

Resource Pressure [mbar]

Type:

sequence

pricing_mult

PPA price multiplier

Type:

sequence

q_balance

Relative energy balance error

Type:

sequence

q_ch_tes

TES charge thermal power [MWt]

Type:

sequence

q_dc_tes

TES discharge thermal power [MWt]

Type:

sequence

q_dot_est_cr_on

Estimate rec. thermal power TO HTF [MWt]

Type:

sequence

q_dot_est_cr_su

Estimate rec. startup thermal power [MWt]

Type:

sequence

q_dot_est_tes_ch

Estimate max TES charge thermal power [MWt]

Type:

sequence

q_dot_est_tes_dc

Estimate max TES discharge thermal power [MWt]

Type:

sequence

q_dot_freeze_prot

Field freeze protection required [MWt]

Type:

sequence

q_dot_htf_sf_out

Field thermal power leaving in HTF [MWt]

Type:

sequence

q_dot_pc_max

Max thermal power to PC [MWt]

Type:

sequence

q_dot_pc_min

Thermal power for PC min operation [MWt]

Type:

sequence

q_dot_pc_sb

Thermal power for PC standby [MWt]

Type:

sequence

q_dot_pc_target

Target thermal power to PC [MWt]

Type:

sequence

q_dot_piping_loss

Field piping thermal losses [MWt]

Type:

sequence

q_dot_rec_abs

Receiver thermal power absorbed [MWt]

Type:

sequence

q_dot_rec_inc

Receiver thermal power incident [MWt]

Type:

sequence

q_dot_rec_thermal_loss

Receiver thermal losses [MWt]

Type:

sequence

q_dot_tes_est

Estimated TES Heat Loss [MW]

Type:

float

q_dot_to_heat_sink

Heat sink thermal power [MWt]

Type:

sequence

q_inc_sf_tot

Field thermal power incident [MWt]

Type:

sequence

q_tes

TES design capacity [MWt-hr]

Type:

float

q_tes_heater

TES freeze protection power [MWe]

Type:

sequence

qinc_costh

Field thermal power incident after cosine [MWt]

Type:

sequence

recirculating

Field recirculating (bypass valve open) [-]

Type:

sequence

required_number_of_loops_for_SM1

Heat loss at design

Type:

float

rh

Resource Relative Humidity [%]

Type:

sequence

sim_duration

Computational time of timeseries simulation [s]

Type:

float

single_loop_aperture

Single loop aperture [m2]

Type:

float

solar_mult

Actual solar multiple

Type:

float

solazi

Resource Solar Azimuth [deg]

Type:

sequence

solzen

Resource Solar Zenith [deg]

Type:

sequence

system_capacity

System capacity [kWt]

Type:

float

tank_losses

TES thermal losses [MWt]

Type:

sequence

tdry

Resource Dry bulb temperature [C]

Type:

sequence

tes_avail_vol

Available HTF volume [m3]

Type:

float

tes_htf_avg_temp

HTF Average Temperature at Design [C]

Type:

float

tes_htf_max_temp

Maximum storage htf temp [C]

Type:

float

tes_htf_min_temp

Minimum storage htf temp [C]

Type:

float

tes_htf_pump_power

TES HTF pump power [MWe]

Type:

sequence

time_hr

Time at end of timestep [hr]

Type:

sequence

total_aperture

Total field aperture area [m2]

Type:

float

total_direct_cost

Total direct cost [$]

Type:

float

total_indirect_cost

Total direct cost [$]

Type:

float

total_installed_cost

Total installed cost [$]

Type:

float

total_land_area

Total Land Area [acre]

Type:

float

total_loop_conversion_efficiency

Total Loop Conversion Efficiency at Design

Type:

float

total_required_aperture_for_SM1

Aperture required for solar mult = 1 [m2]

Type:

float

total_tracking_power

Total Tracking Power [MWe]

Type:

float

tou_value

CSP operating Time-of-use value

Type:

sequence

twet

Resource Wet bulb temperature [C]

Type:

sequence

vol_min

Minimum Fluid Volume [m3]

Type:

float

vol_tank

Total tank volume [m3]

Type:

float

wspd

Resource Wind Speed [m/s]

Type:

sequence